I have noticed an issue in Midi Multi Recording/NewSong/StepEdit, where I am just wanting to enter a one line 'Prog' program change.
The default view is 001 : 1 : 0000 END
Selecting 'Event Filter', with just 'Program Change' ticked in the ensuing menu, is not actioned when 'Insert' is selected, and further Insert selections just increase the Measure/Beat number in the first line.
Adding a tick to include Notes with a Program Change in the menu, increases the Measure/Beat numbers as before, but this time on a separate line displaying only the 'Note'
The other option, 'Step Rec', only displays the opportunity to insert Notes.
So, it seems necessary to take Program Change out of the 'Event Filter' menu, leaving just a tick against 'Note', then 'Insert' and the display now shows
001 : 1 : 0000 Note
001: 2 : 0000 END
You can then use the arrows and dial to change Note to Prog, allowing you to enter the your program number and the display is,
001 : 1 : 0000 Prog
001: 2 : 0000 END
Great, but then Save at which point the display changes to,
001 : 2 : 0000 END
i.e. line 001 : 1 : 0000 has disappeared, although the Program Change is there and working, but I cannot see any way back to edit it, or even review/debug the list if needed.
I could well be missing something, but my searches have not revealed anything, plus this was not an issue in my Tyros 5 Song Creator
My Genos has v1.41 firmware.