Hi Melodies,
Once you have set up or loaded a Playlist, you should find and Select the first file that you want to play.
If you want to start at the top of the list and the cursor is currently at a different position, you can use the 'G' button to move the cursor straight to the top, otherwise use the #2 buttons or the data wheel to move the cursor to where you want to start.
Once the cursor is at the correct position, you need to select the record by pressing SELECT (#7 buttons) or ENTER under the data wheel. The record should now be highlighted in the list with green text on a black background and you should see the yellow LED above the Play/Pause button in the Audio Player/Recorder panel controls flash indicating that the audio file is loading.
However, playback doesn't start automatically. It won't start until you press the Start/Pause button in the Audio Player/Recorder controls.
Once it does start, it should continue playing the list according to how you have set the REPEAT function (button A).
Note that the songs in the list must be present at the same storage drive/folder as they were when you made the list. If the OS can't find a file for some reason, it will show an exclamation mark against it in the list.
I have attached a screenshot of a playlist on my T4. This shows the first record selected and ready to play. A green arrowhead will appear next to it when I start it playing. It also shows an exclamation mark against the third record. This is because when I added the audio file to the Playlist, it was on a USB stick, but now the USB device is not connected! Only those records with a check mark against them can be played.
Playlist mode is explained starting on page 93 of the Tyros4 Reference Manual (English version).
Post back if you still have problems.
Regards
Ian
[attachment deleted by admin]