Author Topic: PSR S910 Video Out  (Read 402 times)

0 Members and 1 Guest are viewing this topic.

Offline darrenkuy

PSR S910 Video Out
« on: February 03, 2019, 02:21:40 AM »
Anyone know why the rca video out would quit? Been sending video signal out to the guitar player for years. Last video. I tried a different cable and monitor, but no go. Today I opened up the case and really only saw the 2 pin plug from the plug to the printed circuit board. Everything looked fine. The cable looked good, and didnít see any burned or corroded solder joints. Played with the utility screen out settings, but nothing.

Offline Toril S

Re: PSR S910 Video Out
« Reply #1 on: February 03, 2019, 09:50:59 AM »
Have you tried a soft reset?
Toril S

Tyros 5, PSR S975, PSR 2100 and PSR-47.
Former keyboards: PSR-S970.

Toril's PSR Performer Page

Offline darrenkuy

Re: PSR S910 Video Out
« Reply #2 on: February 03, 2019, 11:31:49 PM »
Yes, holding down the top key while powering up. It sure doesnít look like a hardware issue, but I didnít ohm anything either. My guess would be software. I might go a bit deeper and try a system reset