How do I assign the effect to the style in the registration? Thank you. Bob
Bob there are various ways to do this depending on what end result you want.
To assign TC3 as an insert dsp to just 1 style part eg chd1 go to the Style 1 tab of Mixer. Touch Effect, then Assign Part Setting.
In the popup window go down to Insertion Effects 21-28 and choose one of those that is currently off, touch it then select Style Chord1/ close. You are now back to the previous window and have to select the dsp type you need. So touch the current dsp currently assigned to Chord1, go to Delay and select TC3. Close the windows back to mixer and you will see the delay assigned to Chd1 with a setting of 34 which you can auditon and adjust.
Save in a registration ensuring at least style is ticked.
You can also assign TC3 to a style as a system effect by touching Chorus/ Reverb in the Mixer/ Style 1 tab. Alongside Chorus you will see the name of the currently assigned dsp, so touch it, and in the next screen go to Delay (you might have to touch more than once due to glitch programming
). Select TC3. Back to Mixer.
Now you can turn up the Sends in the Chorus section for any style part you need. If you go to the Panel tab of Mixer you will see you can also turn up the Chorus sends of any panel voices where you may also need a TC3 effect.
Save as above, to save panel voice settings at least style plus voice must be ticked.
It is also possible to assign TC3 to a Variation Effect (touch Effect in Mixer /Style 1 and ensure System is activated by touching it). Selection is similar to Chorus.
John