Author Topic: Pedals 1&2 not working  (Read 4174 times)

0 Members and 1 Guest are viewing this topic.

Offline latingate

Pedals 1&2 not working
« on: December 14, 2018, 06:56:02 PM »
Pedals 1 & 2 are not working. only pedal #3.
I've tried with various functions and switched polarity.
Also tried with 2 different pedals.
What can be the problem? (I hope it's not a hardware issue..)
Thanks
« Last Edit: December 14, 2018, 07:24:13 PM by latingate »
 

Offline tyrosaurus

Re: Pedals 1&2 not working
« Reply #1 on: December 14, 2018, 07:46:30 PM »
Check to see if you have 'Registration Sequence' turned on by pressing 'MENU' > 'Regist. Sequence'.

If the 'Sequence' button on this page is turned on, any pedals that are assigned to 'Regist+' and 'Regist-' will carry out these functions rather than their defaults or what you have assigned to them.

If it is turned on, simply turn 'Sequence' off and see if this restores 'normal' functionality.


Regards

Ian 
 
The following users thanked this post: latingate

Offline latingate

Re: Pedals 1&2 not working
« Reply #2 on: December 14, 2018, 08:42:34 PM »
Great !!
This was the problem..

Thanks a lot

Check to see if you have 'Registration Sequence' turned on by pressing 'MENU' > 'Regist. Sequence'.

If the 'Sequence' button on this page is turned on, any pedals that are assigned to 'Regist+' and 'Regist-' will carry out these functions rather than their defaults or what you have assigned to them.

If it is turned on, simply turn 'Sequence' off and see if this restores 'normal' functionality.


Regards

Ian