Author Topic: Yamaha Expansion Manager Problem//  (Read 5514 times)

0 Members and 1 Guest are viewing this topic.

Offline Normanfernandez

Yamaha Expansion Manager Problem//
« on: December 07, 2018, 04:03:43 PM »
I want to set Wave 1 and Wave 2 ( to have equal volume) according to the velocity.

In this current setting ( Default )

Velocity 1 - 60 Ish goes from
Almost zero to Loud.  And 61 - 127 is Loud to Very Loud.

I can Adjust the Max Volume for the Higher Velocity for Each Wave.
But How can adjust the Volume

For lower Ranger Velocity
Say 1- 20

This Range Will Very Soft.



My 2nd Problem is.   

IF i Hold the Note Down Any Note that Contains the Wave.

" Hold it Long Enough " the Sample Wave Starts Playing Again. 


If you don't understand this Problem.
I'll break it down more.

Please Help
Regards Norman

 

[attachment deleted by admin]
Norman Fernandez Keyboardplayer
https://www.youtube.com/channel/UCngm8h5k5NmKnowJpkxlDBQ

PSR S770 - Roland FP 30 - PSR 280
Cubase - Kontakt6
 

Offline Seagull29

Re: Yamaha Expansion Manager Problem//
« Reply #1 on: December 09, 2018, 10:35:08 PM »
Hi,
I think you can try to make each wave in a different element (wave 1 in element 1 and wave 2 in element 2) and put equal volume on  or mix them.
Regards
Seagull29
 

Offline EileenL

Re: Yamaha Expansion Manager Problem//
« Reply #2 on: December 11, 2018, 11:55:01 AM »
You can also mix elements from different voices which is great fun to do.

Offline Normanfernandez

Re: Yamaha Expansion Manager Problem//
« Reply #3 on: December 15, 2018, 02:21:48 PM »
adding element 1 and 2 would make the voice play two Different wave files at the same time.

Which is different from what I want. 

I want all the Wave files on a Single Note ( C3)
To have the Same Volume regardless of Velocity.

Norman Fernandez Keyboardplayer
https://www.youtube.com/channel/UCngm8h5k5NmKnowJpkxlDBQ

PSR S770 - Roland FP 30 - PSR 280
Cubase - Kontakt6
 

Offline jwyvern

Re: Yamaha Expansion Manager Problem//
« Reply #4 on: December 15, 2018, 05:10:43 PM »
"I want all the Wave files on a Single Note ( C3)
To have the Same Volume regardless of Velocity".

You can remove touch sensitivity from the overrall voice (either in YEM or later in Voice Set) simply enough by setting the Touch Sensitivity Depth to 127.

"adding element 1 and 2 would make the voice play two Different wave files at the same time."

If that is the only objection (and bearing in mind  I do not understand from your first post what you are trying to achieve) you can put a copy of the same wav into both but you may need to pan them differently to avoid chorusing effects. 

John