Author Topic: Volume of one voice to low  (Read 6222 times)

0 Members and 1 Guest are viewing this topic.

Online Dick Rector

Volume of one voice to low
« on: June 21, 2018, 02:35:26 AM »
I used programs from Michael en Jorgen to bring 1 voice in a style to a maximum (127) but it is still to low. How do I bring this voice to a higher level? Anyone?
I thought I did that before but totally forgotten how.

Thanks in advance,

Dick
PSR-2000 and PSR-S950
 

Offline DrakeM

Re: Volume of one voice to low
« Reply #1 on: June 21, 2018, 03:22:16 AM »
Hi Dick,

The voice you want raised, is it in the OTS settings or one of the voices in the style's Main Parts?
« Last Edit: June 21, 2018, 03:23:26 AM by DrakeM »
 

Online Dick Rector

Re: Volume of one voice to low
« Reply #2 on: June 21, 2018, 04:13:37 AM »
Hi Dick,

The voice you want raised, is it in the OTS settings or one of the voices in the style's Main Parts?

It is in the main part of a (custom) style. Bringing the volume up to 127 on the keyboard and in other programs just isn't enough. If it was in OTS I could do it but not in the style itself.
Thanks for replying Drake!
 
PSR-2000 and PSR-S950
 

Offline DrakeM

Re: Volume of one voice to low
« Reply #3 on: June 21, 2018, 04:57:06 AM »
Well post the style and tell if it is the bass, Pad, Phr1 or2 or which one needs fixed.

Not sure what the problem is or if i can fix it .. but I'll take a look at it.

Offline pieterpan

Re: Volume of one voice to low
« Reply #4 on: June 21, 2018, 06:08:06 AM »
Dick,

Volume has 2 components - 1 is the volume and 2 is the expression, the last has to set on value 127. Did you check this?

Regards <> Piet
Yamaha Tyros 4 - Yamaha KX 25 - Gem WSII module
 

Online Dick Rector

Re: Volume of one voice to low
« Reply #5 on: June 21, 2018, 07:49:03 AM »
Well post the style and tell if it is the bass, Pad, Phr1 or2 or which one needs fixed.

Not sure what the problem is or if i can fix it .. but I'll take a look at it.

Thanks for your kind offer Drake but I found another a bit louder voice and replaced it. It is the solo-trumpet in PHR2 in the style 'Il Silenzio'.

Regards
Dick
PSR-2000 and PSR-S950
 

Online Dick Rector

Re: Volume of one voice to low
« Reply #6 on: June 21, 2018, 07:51:32 AM »
Dick,

Volume has 2 components - 1 is the volume and 2 is the expression, the last has to set on value 127. Did you check this?

Regards <> Piet

Piet, thanks for the reply but where do I find 'expression' on the PSR S950? Problem is solved anyway but I would like to know.

Groetjes
Dick
PSR-2000 and PSR-S950
 

Offline pieterpan

Re: Volume of one voice to low
« Reply #7 on: June 21, 2018, 08:58:39 AM »
Dick,

Don't think you can find it on your KB but MixMaster can.

See attached picture.

Regards <> Piet
Yamaha Tyros 4 - Yamaha KX 25 - Gem WSII module
 
The following users thanked this post: Dick Rector

Online Dick Rector

Re: Volume of one voice to low
« Reply #8 on: June 21, 2018, 09:48:48 AM »
Dick,

Don't think you can find it on your KB but MixMaster can.

See attached picture.

Regards <> Piet


Ohhhh thanks for the reply again Piet, I was looking at the keyboard settings.
Senior moment...... :D
PSR-2000 and PSR-S950
 

Offline DerekA

Re: Volume of one voice to low
« Reply #9 on: June 21, 2018, 12:40:18 PM »
How about turn all the other style parts down a bit, then increase the master volume? (All the way up to 11 if you need to)

Online Joe H

Re: Volume of one voice to low
« Reply #10 on: June 21, 2018, 02:48:33 PM »
Dick,

I've remixed many styles to date and I find that if the volume is too low or too high on one style part only but fine on the other parts, I use StyleMagic to adjust the note velocity.  It could be that the part you are talking about was recorded with a certain Voice and if it was changed to a different Voice... that could be the problem.

Joe H
Music is the Universal Language!

My Article: Using Multi Pads in registrations. Download Regs, Styles & MPs:  http://psrtutorial.com/music/articles/dancemusic.html
 
The following users thanked this post: Dick Rector

Online Dick Rector

Re: Volume of one voice to low
« Reply #11 on: June 21, 2018, 11:13:16 PM »
Dick,

I've remixed many styles to date and I find that if the volume is too low or too high on one style part only but fine on the other parts, I use StyleMagic to adjust the note velocity.  It could be that the part you are talking about was recorded with a certain Voice and if it was changed to a different Voice... that could be the problem.

Joe H

Thanks Joe, the problem is solved but I will keep that in mind as I have Stylemagic. Just never thought of it.......

Regards
Dick
PSR-2000 and PSR-S950