Author Topic: Step Record - Can't select style from User.  (Read 2835 times)

0 Members and 1 Guest are viewing this topic.

Step Record - Can't select style from User.
« on: June 17, 2018, 08:56:03 AM »
Hello. My genos are installing firmware 1.30. in the step record of the song recording. I can not select style from user. Is this a shortcoming?
 

Offline EileenL

Re: Step Record - Can't select style from User.
« Reply #1 on: June 17, 2018, 07:37:26 PM »
This seems to be the case but I never use it so can't help. I have an idea it was the same on Tyros 5.
 
The following users thanked this post: Snicker740

Offline Wim NL

Re: Step Record - Can't select style from User.
« Reply #2 on: June 17, 2018, 11:56:22 PM »
I have creatie over 400 songs with step record.
With all the Tyros serie I could use step record.
Now with Genos not posable to choose User styles.
Now  I can't update these songs.
I have contact Yamaha BNL support.
The know about thuis problem.
But no solution.
Thuis is for me the biggest tump down for Genos.
See also .
https://www.psrtutorial.com/forum/index.php/topic,41557.msg326927.html#msg326927
« Last Edit: June 18, 2018, 12:14:57 AM by Wim NL »
Best Regards,
Wim
 

Offline Atlanta Tom

Re: Step Record - Can't select style from User.
« Reply #3 on: June 18, 2018, 01:44:31 AM »
This was #1 disappointment for me.  I returned my Genos because of the inability to do this.  (I had a demo unit and was on "wait list" for a factory sealed unit - I returned the demo unit and cancelled my order).  If and when this gets fixed in a firmware update I will most likely buy a Genos again.  Until then it's a no-go for me.
 

Re: Step Record - Can't select style from User.
« Reply #4 on: June 18, 2018, 11:39:43 AM »
This seems to be the case but I never use it so can't help. I have an idea it was the same on Tyros 5.

Please watch Video, You will see.
https://www.youtube.com/watch?v=m7q5MX2GHUU
 

Offline pjd

Re: Step Record - Can't select style from User.
« Reply #5 on: June 18, 2018, 09:45:47 PM »
Hi --

Yes, that feature is not implemented in v1.30. I hope this is included in a future update.

All the best -- pj
 

Offline Denn

Re: Step Record - Can't select style from User.
« Reply #6 on: June 18, 2018, 09:55:49 PM »
You can only step record with on-board styles not user or custom or third party etc. ONLY with on-board styles. I have tried all ways with no results. Even if you copy the pre-set style to the user or H/D on the Tyros one step does not work. Regards, Den.
Love knitting dolls