PSR Keyboards (11 Boards) > PSR-3000/1500 (SFF1)

How to layer sounds

<< < (2/3) > >>

Bruce Breen:
As Gary mentions, when using the organ flutes you can increase the different stops on the screen.

Also, using registrations, I always set my accompaniment volume to around 80%, then use a volume pedal to swell the right hand voices, especially  for solos. This works well, especially through PA systems...
 

DerekA:
On the PSR line, from the panel you can layer 2 voices (R1 + R2).

On Tyros + Genos, you can layer 3 voices (R1 + R2 + R3).

There is also a trick which involves sending MIDI out back to MIDI in which lets you use song channels to layer up to 16 voices.

Denn:
Look into the mixing console. If you put a voice into R1 then work your way through the tabs in the mixing console you can change or enhance almost everything. Reverb, Chorus, brightness, Octave change, etc. Magnificent button to press on a rainy day!  ;) Try it, you may like it. Regards, Den.

ekurburski:
 Yes, I remember doing things on the fly!  One of the main reasons I've never yet played a gig on an arranger (that's going to change very soon!).  I've never taken the time to set up the kb to play a gig!  I figure the first nh show will take uo about 15 tunes, soo,,,, I'll build my first gig disk with 15 tunes ready to go,   Then I just need to come up with a new show each month.  When I was working b4 I had my tunes all on 5x8 index cards and would simply shuffel through them, picking out the next tune as I went.  figure that most of the tunes I will do will be the same old familiar ones so it shouldn't be to difficult to build the play lists.

Earl

SeaGtGruff:

--- Quote from: DerekA on January 26, 2018, 10:16:10 AM ---On Tyros + Genos, you can layer 3 voices (R1 + R2 + R3).
--- End quote ---

But I think it's still only two voices which are layered together, right? That is, it's a 3-way split-- Left | Right1+Right2 | Right3.


--- Quote from: DerekA on January 26, 2018, 10:16:10 AM ---There is also a trick which involves sending MIDI out back to MIDI in which lets you use song channels to layer up to 16 voices.
--- End quote ---

I love that trick! Using the keyboard as though it were an external MIDI controller lets you access the keyboard's full potentials as a multitimbral sound module. :)

Navigation

[0] Message Index

[#] Next page

[*] Previous page