PSR Tutorial Forum
Genos (12 Boards) => Genos - General => Topic started by: ugawoga on October 19, 2022, 02:02:00 PM
-
Hi
After a long time now , i am getting my head around the mixing and mastering dark areas and with Neutron 4 on the computer , you can even enhance the Genos sound. No need for a PAX5 as the sound of the Genos is the boy.
My only beef at the moment with the Genos is the output gain and to get a decent gain out you have to engage the compressor if you leave the EQ flat.
I can get roughly 36Luf's with the EQ flat and Compressor off.
I can get down to 22Luf's with compressor engaged and Eq flat.
We all need around 20Luf's to start gain staging and mixing to 18 Luf's to finish in Ozone 10 for !4 Luf's streaming and 8 to 9 Luf's if you want to stick the songs on a CD.
I use the Klanghelm VU meters now to gain stage but once done it always leave a noise floor. With this meter plugin you can check the gain and mid sides also.
If anyone has got any tips on how to get the max gain out of the Genos for no noise floor, i would appreciate that.
I use a Focusrite 6i6 and that is a quality sound USB box.
I also have got my head around why Eileen says some of my mixes a were little on the harsh side.
Well, i have discovered the mid side areas and all others with an AB plugin. This one is a great plugin as you can solo the sub area, low mid, high mid, high's and bass. Match that to a reference song and you are almost there. I now do automation and stereo adjusting.
Taking my time and nearly ready to hopefully improve.
I just have to now find a go to method like templates to get in the ballpark a lot quicker.
Do not worry Eileen, i always set aside live practice every day as that is the key to not having to do hundreds of cutting and pasting.
I still like the human touch
Another thing when editing in Cubase is that styles always leaves a load of note flack all over the place and once you have cleared it with delete midi notes to the length size you choose everything is more clearer and pin sharp.
It is a pity that there is not a section on this forum for Cubase and Genos owners as i am sure a lot of progress can be made with idea swapping
I must admit Izotope are improving all the time and bringing the frustrated an easier task to get results and you learn a lot on the way.
All the Best
John :)
With the noise floor ,i do deal with that with Izotopes RX Elements plugin
-
I don't own a Genos, but I do have the SX900. Does Genos have a built in WAV recorder? What I do on my SX900 is record there to USB stick, then import to my DAW (in my case FL Studio), then I "normalize" the WAV file so that it brings up to a usable level.
Otherwise, on the 6i6, do you have it set to INST on both inputs assuming you are recording in stereo? Another thing you can try is the SPDIF option.
-
Hi Mixer
I tried instrument and live setting in the Scarlet mix Control and it makes no difference.
I think that the Instrument setting is for live instruments plugged into the Focusrite box
I have the input gain on low as there is quite a big noise floor on the high gain and i do not thing that is a go.
The only way for me is to set the Genos at 20 minutes past the hour on the Volume knob and have the compessor on Natural 46, the texture i leave at 50 and the output on 88. It is a good dry sound. Even though all effects and reverbs are off there is still very very mior nuances of some effects going on but not that noticeable.
This gives me around 18 to 20 Luf's which would be in the ball park for mixing.
What do you make of that??
All the best
John
-
That sounds about right John. I think we must finally acknowledge that recording the Genos to any DAW has huge limitations and that Yamaha wants us to buy a Montage, which is well-engineered for that purpose, as well as, the live stage.
I got so disgusted with the trap doors and circus hoops required to record the Genos to Cubase, that I ended up only using VST instruments with the Genos as a $7,000 MIDI controller! Most VST voices are far superior to any of their Genos counterparts. Hans Zimmer uses VST voices for his movie scores. Those voices are readily available to any of us and are reasonably priced. I wouldn't waste anymore time figuring out how to get a decent recording of the Genos into a DAW. Of all the people on this site, you've probably achieved the best results. I admire your expertise. I'd love to hear what you could do with quality VST voices 😬.
I'm not trying to rain on your parade but you may have reached your maximum with the Genos to DAW recording. Do you use any quality VST voices? You have the knowledge. Give them a try. They're far easier to use because they aren't locked in the maze we call "Genos." 🤣
-
My only beef at the moment with the Genos is the output gain …
I am not sure I am responding accurately to your situation, but what I do is increase the audio output setting on the Genos to +6 or +12 dB when I am recording audio to Cubase. Then I adjust the sliders in the Genos Mixer and Cubase MixConsole to get the levels I need.
I am using a Focusrite Scarlet 8i6 with the S/PDIF digital audio output from the Genos.
-
Hi Michael
Do you get any noise floor through the SPDF connection and how far up with the Genos volume knob do you go exactly
I find when i send a song to Cubase with the eq flat and compression not engaged it is in the 35 LUF's region and that means you have to increase the by 17 Luf's to get to 18 LUF's which is in the ballpark for mixing so it leaves 5 to 10 Luf's whether streaming or Cd which allows you to master your song and give it a touch of limiting to finalize.
I can get rid of noise floor with RX from Ozone.
It would be nice to get the Genos Smack on 18Luf's to get the best gain recording without raising the gain too much in Cubase.
-
Hi Lee
I am nearly there with the Genos and believe it or not Ozone 10 and Neutron 4 gets a little more quality out of the sounds as well.
I just done the main part of Matthew and Son which i am using to get things rock on with the mix and i have got pretty close now .
Yes it has taken a long time , but i still keep the practice up. With that song you have to get the syllables right or it sounds wrong and the bras and trumpet does a fine job as if i sang sung the sing song i would sound like a like a worn out frog.
The noise floor can be dealt with.
What i find confusing is if i use the Klanghelm VU meters which are supposed to be accurate and get any track sound to 18Luf's, the Cubase mixer at the bottom says it is -4db's when it also should read 18 Luf's and there a lot of sounds that do not need so much increasing and some need massive increases.
You just have to go by your ears and reference track.
So i get the boldest sounds to 18 Luf's and work around that fo balancing everything.
There is an AB plugin that is 100% for soloing every frequency that counts against a reference and i have just got my ears around that now.
I see what you think on when finishing this song.
I have just got to get a system going now.
-
Do you get any noise floor through the SPDF connection and how far up with the Genos volume knob do you go exactly?
The Genos volume knob does not control the volume of the S/PDIF digital audio output. It controls the volume of the analog audio output of the Genos, which means that when you are not using the S/PDIF connection, you are using an internal analog amplifier which may well have a noise floor of its own. Using the digital audio output instead bypasses this amplifier.
My monitors are not connected to the Genos. I have them connected to the 8i6, and I use the master volume knob on the 8i6 to control their volume.
I keep the Genos volume knob turned all the way down, but that’s just me being obsessive. That knob has no effect on anything the way I have things set up.
I described the setup, including a diagram of how I have it wired, in this thread (https://www.psrtutorial.com/forum/index.php/topic,62181.msg476081.html#msg476081).
-
Hi John, try Club Cubase Live Stream. They have these usually every week and you can ask questions about anything Cubase related and get answers from Greg in real time. Here's a link from the 18th, give it a try. He knows everything there is to know about Cubase. :)
https://www.youtube.com/watch?v=hsyYZ5pkEpk
Christopher.
-
Hi Michael
Well the rub is whether you get a higher gain from using spdf as opposed to rca ins and outs
I use a pair of DXR's yamaha speakers for the pleasure listening as they are not flat and i use Focal alpha monitors for Cubase.
All the best
John
-
Hi Chris
I will have a look on Friday and ask a question to Greg Ondo if i can.
I am really convinced that i can only attain a quality recording without a noticable noise floor if i incorporate the compressor on Genos and have the Eq flat
As i said there is a Ozone tool that can eradicate the low noisefloor.
I do not think that after reading that you would get a higher quality recording gain using spdf input.
I put the compressor on Natural and increased the volume in the compressor till i get 20 Luf's.
Am i right in saying that the compressor on the Genos is more or less a elaborate volume control rather than squeezing the peaks and fattening up the body.
All i wanted to do is to get other peoples opinion through their experiences and if there is a Genos 2/3 Yamaha they need to look at the gain control as they have made provision for compaibility with Cubase using the Genos
Thanks for the tip Chris, I will get on it :)
All the Best
john :)
-
Hi John --
I'm sorry this response is tardy.
Here are a few articles about gain staging. I hope other folks find them useful, too.
https://www.sweetwater.com/insync/gain-staging/
https://www.sweetwater.com/insync/quick-guide-proper-gain-staging-for-live-sound-mixing/
https://www.youtube.com/watch?v=E0gvT2RHMXk
And a few links about LUFS:
https://www.sweetwater.com/insync/what-is-lufs-and-why-should-i-care/
https://www.sweetwater.com/insync/how-to-master-audio-for-youtube/
https://blog.landr.com/lufs-loudness-metering/
Gain staging deals with decibels (dB) because it applies to electrical signal levels (referenced to a zero point).
LUFS are whole other creature and are used mainly in the mastering and/or mixing process alone. LUFS are a measure of perceived loudness, not electrical signal level. Thus, it isn't meaningful to compare dB vs. LUFS, especially for gain staging.
I hope these thoughts and links are helpful -- pj
-
Hi Lee
How are you doing?
I am getting pretty good results now
1 The gain staging is learnt now and balancing everything
2 I do not use much effects only necessary ones
I put Ozone Relay on all tracks (Relay is a low-CPU-overhead utility that lets you adjust your tracks' gain, pan, stereo image)
Then underneath a Klanghelm Vu meter on all tracks which i use the 18 Luf meter and match all tracks ,(Gain Stageing).
I do find the meter better to look at and i check also at bottom of Cubase mixer to see if that matches or near.
Then i put Neutron 4 on all tracks.
This allows me to enhance the sounds which is fantastic and the intelligent program puts you in the ballpark with almost everything.
I maybe stick a reverb here and there or a special effect.
I make sure Neutron 4 is on the master bus wth GulfossEQ and RX elements.
I have Sonarworks for headphones and Monitors in the Control room rack with ADPTR Metric AB. This plugin allows you to AB with a refererence track and solo the sub, Bass, Low mid, hi mid and highs and i find that invaluable for getting that warmth in a song.
I have got my song that i am working on almost identical to the original mix.
The thing is i hope it now comes out the same when playing on all devices.
Onced fully mixed i will check on the monitors and re- check finally on headphones again.
After that, polish in Ozone 10 and hope !!!! :-\ ;D
Oh well Lee i am enjoying the learn curve believe it or not.
All the best
john
-
Wow, John...you're miles ahead of me!
I gave up recording once the Covid restrictions were lifted. I love hearing about your progress though. Sometimes it's not the "kill." It's the "hunt" that's fun. Thanks for the progress report.
-
Hi Lee
There is so much to delve into it would take two lifetimes to learn
I have got the noise floor down quite a bit now .
Tonight i went over some gain stage video's again.
The thing is that sometimes an orchestra can be louder than the drums at the gain stage level, so you have to push up the drum gain a little more and use volume a little to compensate .
As long as thing do not clip and remain in the sweetspot ,why not! :P. There is not a hard and fast rule really.
I made a song of a few bars and use that to destruction to learn.
There is an Italian looking guy who does Cubase video's and he is great at explaining things.
So in a nutshell get that gain stage right and your on your way in no time.
By the time i have finished my latest song about three more Uk Prime Ministers will probably be sacked!! ;D :P :P :P
All the best
John :)
-
Hi Lee
Do not give up
I had a word today with a Yamaha support guy uk.
I said to him that i get low gain and i cannot get it up!!
He laughed out loud and the penny dropped after being somewhat confused
I fell for that one!! ::) ::)
He said he uses a plugin from ik Multimedia Mixbox to get the gain for recording right.
I will have a look as i have Mixbox.
He also said that it is a problem and you will have to use software to get in the ballpark.
You are absolutely right in saying that VST is so much better than the Genos and less problem for gain.
The Genos has styles and everything you need for ideas and i just like to get some quality out of the machine
Having a Focusrite box he suggested that i use the mic inputs at the front left and right or two mic inputs so to speak.
This way the Focusrite Scarlet 6i6 can be controlled from the monitor gain.
This would get you there.
That could make sense as that is what you would do if you had a guitar.
The next step for me after he also suggested is to have the EQ Flat and raise the gain on the genos EQ section.
if i raised that to full it would then theoretically get you to 23 luf's which then would be only 5 luf's away from the sweet spot for mixing.
This comes from support and he does know that the Genos has a low output gain.
So using software is the only way to get to 18 Luf's approximately.
It does make you think when you see quality demos from Yamaha!!.
It would be nice to have Yamaha explain the Genos gain and getting the best out of your machine.
There is a lot of things Yamaha could explain in plain English , But!
I also said to him about Genos 2/3 and he replied " I don't know what your talking about"!! :P ::) :o
i have watched several gain staging video's and one stood out for me.
This way record your song and watch every track and just adjust the hot ones an adjust to near 18luf's.
If you made all tracks equal this will probably make the master bus over the top.
It should by according to experts only take abou 30 minutes to gain stage. It is just understanding it which takes the time.
Some instruments do not need to be 18 luf's as they are strong anyway and need to be lowered.
Having a recording from the Genos must be quite near a balanced song if done right , so your song must be somewhere near rather than live instruments which can be all powerful or weak..
It all comes down to ears in the mix before mastering .
The thing is,is to get a system going and that is where i am at. The ears are paramount.
I have done several mixes on the song that i am determined to get right and i am getting near to judging where i am at.
I know what the Genos can and cannot do now and now after my disussion with a Yamaha support guy ,i can now move on.
it is like riding a bike , once you get over a few bumps and bruises. Still got a few to go!!! ::) ;D ie, Windows 11 Lol!! flaming AS media drivers causing unknown devices!! ::) :-X Now fixed after a 2 hour headache.
all the best
john :)
-
Interesting stuff, John. I believe the Italian looking guy is Dom (spelling uncertain). He is a master. I’ve watched several of his videos.
If it puts your mind at ease and I’m sure you already know this, in listening to several so-called "professional mixes" from the top artists, the individual instrument gains are all over the map. One track sounds really good while the next one is either anemic or turns both subwoofers in my home theater system inside out! And then there is the variable of who is actually playing the recording. YouTube has its own compression level and yet their levels are all over the map. One video is hardly audible while the next one sends your monitor speaker woofers crashing into your forehead. Same with satellite radio. You could probably spend a year on a single track thinking you got it perfect, only to find out it sounds terrible on several systems.
It’s not like the old days my friend, where vinyl was played on ordinary sound systems and always sounded roughly the same. I remember when Fleetwood Mac released their Rumors album. They had spent about $100,000 (U.S.) on its production and everyone thought they were insane because the top stars de jour were cranking out albums for $5,000 or less. The Rumors album was absolutely stellar. So what happened? We entered the digital age. Clicks, pops, and hiss were eliminated which gave rise to pristine recordings flooding the CD market. But there was a problem. It gave every Tom, Dick, and Harry the ability to do their own thing. Today, we have a patch work quilt of end results – some great others terrible – and yet nobody can actually define what an industry standard sound is!!
If I were you, I’d use those golden ears to produce the best mix you can and ignore the deep mathematics and graphs – although I can't blame you for wanting to “see” your musical results. I do the same thing when adjusting my home made speakers for room response. I figure if the curve “looks perfect” the sound will be perfect. Not always true. Sometimes the math and graphs lie because they can never account for the human perception of sound.
My friend was the chief speaker designer for Yorkville Sound in the 90s. He said they would design a speaker, measure it in the lab, adjust the crossover and driver placement for perfect acoustic phasing and STILL come up with a terrible sounding speaker. A lot of times they would use their ears to “tweak” the design. The frequency response graphs looked dismal but the speaker sounded much better.
So, grab yourself a pint, listen to your best mixing efforts and let yourself off the hook. The average Joe (or “bloke” in your verbiage) will never know the difference, unless of course he's listening to it over one of my speakers 🤣. Thanks for the great posts!
-
Hi Lee
Yo are exactly right as even the televison in UK is now not perfect on sound.
Sandra,my other often say's to me, am i going deaf, i have to turn the Tv up more.
I have also noticed this, but i personally do not watch general tv , only the news . I download films.
I think this new standard called Loudness units or LUF's are to blame.
if you make sounds that go over the standard of 12 to14 Luf's it gets turned down.
So many will percieve the inustry standard sound as a lower recording.
I also notice on tv that the adverts are always louder to make the public pay attention,ie, brainwashing.
I do think that tv broadcasting is terrible today even the standard of speech.
The broadcasting corporation have their own rules it seems and standards are out the window.
if you make songs in Cubase , there is a free program called loudness penalty and you can see if you will be turned down with various streamers.
If you decide to get going in Cubase there is a great not expensive program called AB Metric and you can solo the Sub, Bass, Low Mid, Hi Mid, and highs to a reference track and that puts you right in the ballpark. Like i said my song now virtually matches the original and maybe a little more rounded using today's digital equipment.
With Izotopes Neutron for mixing and Ozone 10 for mastering after the learn curve the recordings should be the best as you possible can achieve on whatever budget you are on. Both programs have intelligent listening to your tracks known as AI and that gets you in the ballpark.
So after getting used to AB Metric after while , it should be easier to achieve the same in Ozone10 as you have a liitle more deeper learning.
For me it is getting to understand what is going on inside these programs, but when it sinks in, it does.
it was interesting talking to yamaha support man as he agrees that only software can get you up on gain .
The Genos can only do so much and that needs to be addresed when a new Genos appears.
Also step recording your own style chords which you cannot at the moment. You can do it with chord looper, but would be quicker to step them. i say this because fills do not alway land where you want them and you can miss one now and then. it would speed up workflow.
it does not matter live, just play because the average general public would not notice so much as we do. You can always cover your mistakes.
It is all interesting in my view and gives the brain something to keep it going in our later years.
I just want to achieve the best that i can and keep the brain active.
I wish i could say that about the aches and pains after lifting a plant pot!! :P ::) ;D
All the best
john :)
-
I got interested in this noise floor issue, so I decided to do an experiment. I played the same note into Cubase via digital and analog audio connections.
I recorded digital audio into Cubase from my Genos via the S/PDIF connection to my Focusrite Scarlett 8i6. I had the Genos' Digital Out Level set to +6 dB.
Then I recorded analog audio into Cubase from my Genos' Sub1/2 analog audio outputs to the 8i6's preamplified front panel inputs, which were set to LINE.
Judging by the track images, there does not seem to be a significant difference in the noise floors of these two .wav files, and the signal to noise ratio seems fine in both cases.
I've attached a .zip file (https://1drv.ms/u/s!Aq2dTIlD9fn0jr9sBl9u9WxgNIhNxg?e=B5Dpdo) containing the Cubase project, including the two .wav files.
I understand that I may somehow be missing the point of what has been discussed here so far. If that's the case, I'd be happy for the opportunity to learn something new and hear about what I don't understand yet.
[attachment deleted by admin]
-
Interesting stuff, John. I believe the Italian looking guy is Dom (spelling uncertain). He is a master. I’ve watched several of his videos.
..........
If it
Hi, it is: Dom Sigalas. He is a Music Producer and Film Composer based in London. To this day he has composed and produced music for films, television and radio commercials, documentaries, musicals, corporate video, video games, websites and hundreds of tracks of library music. He has done sound design for many award-winning companies worldwide and is also a highly acclaimed mixing and mastering engineer.
I have a hate/love relation with cubase and yamaha, not as 2 apart/standalone features, but to let them work together. It seems Yamaha intend to keep it as 2 products to sell, so a seamless integration is not their 'priority' at all.
Great vids from him .. 👍
-
I am not sure I am responding accurately to your situation, but what I do is increase the audio output setting on the Genos to +6 or +12 dB when I am recording audio to Cubase. Then I adjust the sliders in the Genos Mixer and Cubase MixConsole to get the levels I need.
I am using a Focusrite Scarlet 8i6 with the S/PDIF digital audio output from the Genos.
Where can you adjust the audio output setting IN your Genos? I can‘t find this in the Menus. Thanks!
-
I have a hate/love relation with cubase and yamaha, not as 2 apart/standalone features, but to let them work together. It seems Yamaha intend to keep it as 2 products to sell, so a seamless integration is not their 'priority' at all.
Agreed! I admire John and the others who have figured out how to record the Genos into Cubase. I've done it but I spent more time figuring out the signal path and workflow than actually recording a song 👿!
Yamaha REALLY needs to provide a seamless interface for recording directly to Cubase. I gave up because after spending 5 hours trying to get the process to the point it worked, I felt more like a circus animal actor than a musician!!
-
I see what you mean, @Lee. I can make (compose) everything with Cubase that I could do with the Genos. The reverse is not possible: the Genos cannot make everything that Cubase can. The difference is that one requires less workflow than the other. I think I misinterpret your definition of 'musician'? In my opinion, someone who composes in Cubase is just as much a musician as someone who plays a keyboard. ('Softsynth vs. Hardwaresynth') ;)
-
Where can you adjust the audio output setting IN your Genos? I can‘t find this in the Menus. Thanks!
Hi Joe,
The output volume level from the Genos [DIGITAL OUT] jack (S/PDIF) can be adjusted in "Menu > Utility > Speaker/Connectivity > Digital Out Level". See also the attached screenshot.
Best regards,
Chris
[attachment deleted by admin]
-
Hi Chris
Is there any difference between RCA output over SPDF
I hear there is not much difference
So you can increase the SPDF by +12db
You can do the same With flat EQ and use also +12db
People should know that the Genos master volume is not a gain control.
This setting would get you to 23 Luf's.18Luf's roughly to get into the sweet spot for mixing.
It would be nice to get the gain for recording in Cubase a little higher quality level which gives a good bit of headroom for a wave file.
Up to now i use the Cubase gain.
Not too bad on strong instruments but others can be a pain after gain, because it always leaves a noise floor, hence needing a better gain level to start with.
I use Izotope RX Elements to get rid of that at the moment, so not the end of the world.
The Yamaha support man i spoke to uses IK Multimedia software to get rid of his noisefloor.
This means it is something we will have to live with, with the current Genos if that comes from support.
If the genos had a 24db gain we would be there with bags of room.
All the Best
John:)
-
Where can you adjust the audio output setting IN your Genos? I can‘t find this in the Menus. Thanks!
You can’t, as far as I know, for analog audio output from the Genos. Chris showed where to do it for digital audio output a few posts ago.
I used the preamplifiers in my Focusrite Scarlett 8i6 audio interface to boost the analog audio signal from the Genos to the level that I needed.
-
Hi Mike
You go to Utility on the Genos
Also there is a gain In the master section EQ . You have a +12db
So far M8 i can get up to 23 Luf's
If you use the pre -amp on the focusrite ,are you going though the mic/instrument inputs on the front.
The Yamaha guy suggested that as a possibility to get higher quality
Can you now doing that get to the mix gain stage of 18 Luf's
!8 Luf's is suggested as this is where plugins operate best.
-
In my opinion, someone who composes in Cubase is just as much a musician as someone who plays a keyboard.
The difference is, how hard and for how long are you willing to hit your head against the wall of the learning curve that Cubase requires.
I was a software developer in my previous life, so I have professional level skills and tolerance for hitting my head against the wall. I imagine that many musicians don’t have that level of interest and tolerance.
I have a very smart guitar player friend who can’t even tolerate the learning curve for his simple foot pedal looper. I suspect he’s a more typical musician than I am.
-
Not too bad on strong instruments but others can be a pain after gain, because it always leaves a noise floor, hence needing a better gain level to start with.
Can you mention a particular quiet/weak instrument that has this problem? I would like to experiment and see what this looks like.
Thanks…
-
If you use the pre -amp on the focusrite ,are you going though the mic/instrument inputs on the front.
That’s what I did; front inputs. My 8i6 audio interface has no gain controls or preamps for any of the rear inputs.
When I was routing the analog audio into the rear inputs of the 8i6, the signal was way too weak to be useful.
I just learned about LUFs yesterday on this thread. I have not yet gotten to the point where I know how to measure them.
-
Hi
I have got my head now around Cubase and use it's Control room also.
Yes i had quite a bit of headbanging at first.
I must tell you that play a song on the Genos and send that to Cubase for midi editing which is very easy and does not require the Focusrite.
Focusrite comes in when recording to a wave track
The gain level is paramount and as i said we need the right level for gainstaging.
Once that is achieved the mixing is a quick process. It is looking that way for me now.
I have taken my time over one song and hammered it to death and destruction many times and as you know in Cubase it is non destructive if you save an original take.
I now can gainstage properly and mix a song, but i have struggled in certain areas and that made me purchase th AB Metric plugin to solo all frequences easily and use a reference track to compare inside this little program.
If you ask what is the difference between rms and Luf's you would get a long story about average louness and so forth.
If a CD is about -8 to-9 Luf's is must be equivilent to the - 3 db that we all know for 60s, 70s music
This EDM rubbish is up near the 0db or Motorhead!!! 8) ;D "Earplugs"!!! 8) :P ;D
The better that you can get a quality gain ,the easier it is to gainstage and mix.
I am still learning as it never ends, .
it is all fun and keeps the noddle from depreciation.!! ;D
Ps Luf's is the new loudness units that is supposed to be the todays's standard. It is what humans perceive as loudness. I wished the BBC kept to it .
With Rms , i not to sure of all of it's technicalities but i would stay with what we perceive as loudness because Rms can look loud from looking at a meter but but not as loud as you may perceive when hearing it if that makes any sense.
If you go over the Luf unit for a streaming site they would turn you down to -14 Luf's. That is why -18Luf's leaves headroom for mastering.
So if you had the gains and mix properly done you can be at the same -14 Luf's as someone else and his one may be turned down being over the top and that will sound duller and lower in perceived volume with both songs being -14 Luf's.
-
Hi Chris
Is there any difference between RCA output over SPDF
I hear there is not much difference
So you can increase the SPDF by +12db
You can do the same With flat EQ and use also +12db
People should know that the Genos master volume is not a gain control.
This setting would get you to 23 Luf's.18Luf's roughly to get into the sweet spot for mixing.
It would be nice to get the gain for recording in Cubase a little higher quality level which gives a good bit of headroom for a wave file.
Up to now i use the Cubase gain.
Not too bad on strong instruments but others can be a pain after gain, because it always leaves a noise floor, hence needing a better gain level to start with.
I use Izotope RX Elements to get rid of that at the moment, so not the end of the world.
The Yamaha support man i spoke to uses IK Multimedia software to get rid of his noisefloor.
This means it is something we will have to live with, with the current Genos if that comes from support.
If the genos had a 24db gain we would be there with bags of room.
All the Best
John:)
Hi John,
The difference is that the S/PDIF signal is already a digital signal (going directly from your Audio Interface to the computer via USB). When using the analog Line Outputs on the Genos, these analog signals must first be converted into a digital signal in the A/D converters of the Audio Interface. With a good setting/adjustment, there should be almost no audible difference in quality. But if you have the option (i.e. the Audio Interface used has a coaxial S/PDIF Input), I recommend bringing the Genos’ Main Out signal digitally into the computer. (If you are also working with the Genos’ SUB Outputs, you must use these analog via the Audio Interface anyway.)
By the way, if you're using the analog Main Outputs (i.e. going from there to the Audio Interface), I recommend turning the Master Volume control up quite a bit (about 3 o'clock). If you're monitoring the Genos signal through the GNS-MS01 speaker system , you can turn the volume down there if it is too loud overall.
The SUB Outputs and the AUX Outputs, on the other hand, have a fixed level(not affected by the Master Volume control). To increase this on the Genos, you could, as already mentioned, e.g. increase the Output on the Master Compressor a little, or you could increase the respective part volumes. However, the most important thing is that the Input Gain of the AUDIO INTERFACE is set correctly (i.e. turned up as much as possible, but without the clipping LED lighting up during the loudest music passages). Depending on the Audio Interface model and the Input jacks used, the Input Gain can be set directly on the Interface or in the associated control program on the computer that is supplied with the Interface. If the Input Gain on the INTERFACE is set correctly for each analog Input used, as described, you will not have any Gain problems in the DAW (e.g. Cubase) either.
Hope this helps!
Best regards,
Chris
-
Is there any difference between the Sub3/4 outputs and the AUX outputs?
-
Is there any difference between the Sub3/4 outputs and the AUX outputs?
Hi Michael,
SUB Outs 3/4 can be alternatively configured as AUX Outs (in the Line Out display). Then they output the same signal as the MAIN Outs, the Headphones jack and the 8-pin socket for the GNS-MS01 speaker system, but have a fixed level.
When configured as SUB Outs, these outputs work exactly like SUB Outs 1/2. So you can either assign any parts to a single SUB Out (stereo signal is summed to mono) or to two adjacent SUB Outs (1/2 or 3/4) if a stereo signal is required (e.g. for Mic/VH). Note: Parts routed to SUB Outs will be removed from the MAIN mix. For the sake of completeness, it should be mentioned that no System Effects (Reverb, Chorus and Variation effect blocks) are output via the SUB Outs. (Of course, this does not apply if SUB 3/4 are configured as AUX Outs.) SUB Outs also have a fixed level (are not affected by the Master Volume control).
Best regards,
Chris
-
Hi Chris
Thank you for your explanation , much appreciated
I do not know what the difference would be by connecting with SPDF with the input gain conumdrum
Is there a marked difference as i get very good quality with RCA sockets sound.
I will try SPDF but i do not know what the two ends of the connector would be like exactly
I need to know what to order from amazon or a music gear shop.
I have seen that you have a +12 gain movement in the Utility.
I could give it a try as Digital to digital should be better.
Have you a description of the lead that i should buy.
All the Best
john :)
-
Hi Chris
Thank you for your explanation , much appreciated
I do not know what the difference would be by connecting with SPDF with the input gain conumdrum
Is there a marked difference as i get very good quality with RCA sockets sound.
I will try SPDF but i do not know what the two ends of the connector would be like exactly
I need to know what to order from amazon or a music gear shop.
I have seen that you have a +12 gain movement in the Utility.
I could give it a try as Digital to digital should be better.
Have you a description of the lead that i should buy.
All the Best
john :)
Hi John,
To connect the Genos S/PDIF Digital Out to the S/PDIF IN of the Focusrite 6i6, you need a high-quality coaxial cable suitable for digital signal transmission, with RCA (Cinch) connectors on both sides:
>>> https://www.thomann.de/gb/cordial_cpds1_cc_digitalkabel.htm
P.S.
When using the analogue Line Outputs of the Genos, it is important to use unbalanced cables (6.3 mm TS phone plugs on both sides), i.e. no balanced TRS cables. If you are using the Inputs on the front panel of the 6i6 (where you can adjust the Input Gain directly by using the GAIN knobs), it is important that these Inputs are NOT switched to "INST". Basically, I recommend using to the LINE IN jacks on the back of the Focusrite. Here you have to make sure that the Input and Output Levels are set appropriately in the associated software program "Focusrite Control". (If necessary, use the "PAD" function to lower Input Levels that are too high by 10dB.)
Best regards,
Chris
-
When using the analogue Line Outputs of the Genos, it is important to use unbalanced cables (6.3 mm TS phone plugs on both sides), i.e. no balanced TRS cables.
Can you explain why? Thanks…
-
Hi Chris
I will get on it and get a cable
No harm to give it a try.
Some say though there is not a lot of difference between SPDF and the RCA results sound wise
At the moment i have to use the Line on the focusrite 6i6 and use Low Gain.
With SPDF lead plugged into back of my 6i6 from the Genos i still have RCA outs to Monitors. I have not got to use the SPDF cable out?
So i gather that i still use Line and low gain on my Focusrite program mixer. I cannot use hi gain as it would be a nasty noisy experience.
I do doubt whether the Genos will exeed much difference in gain to that of RCA. . I do not know really know until i try.
I just need a slight putting right here just to make sure i do not do a Marty Mcfly when he blew up the massive speaker in "Back to The Future"!!! :P ;D
£9 for the lead and £10 postage . No wonder the Royal mail are going on strike!!! ;D ;D ;D ;D ;D !"Yo Man THOMANN"!!
All done. Thanks for the link. :)
Hi Mike
I use the unbalance RCA outputs when i started with the Genos and got a hum noise through my speakers.
I purchased a Behringer hum destroyer And have the RCA outputs of the Genos into the Hum destroyer and balanced cables out to the speakers.
What i have been doing is use that system for my Yamaha DXR 8 speakers and then pull the main out leads to use the outs from the Genos straight into the Focusrite using balanced cable even though the Genos has unbalanced outs.
I am not the most technical about all of this but it has worked.
If now i use the SPDF as Chris says i can use the main RCA main out for my DXR's and the SPDF straight to the Focusrite.
A lot neater. With the +12 db at our disposal with SPDF that will get up to -23 Luf so ony 5 Luf's out .
The software like Cubase gain would probably with an estimate be inside the +12db Gain needed for little or no noise floor.
Well, hope!! :)
.
All the Best
John
-
When using the analogue Line Outputs of the Genos, it is important to use unbalanced cables (6.3 mm TS phone plugs on both sides), i.e. no balanced TRS cables.
Can you explain why? Thanks…
Hi Michael,
Yes, as already mentioned, all audio outputs of the Genos (as with all other Yamaha arranger keyboard models) are unbalanced. That means the RING contact of the output jacks is not connected internally. If you use a balanced cable (TRS to TRS plug), a balanced input (e.g. mixer, audio interface or active speaker) expects an input signal (minus phase signal) at the RING contact. But he only gets the TIP signal (plus phase signal). The minus phase input is therefore "open" (because, as mentioned, the RING wire of the cable is not connected in the keyboard output jack). This can lead to humming, and the resulting input signal is in many cases 6dB quieter (because the "minus phase" signal expected from the balanced input is missing). Therefore (if no DI box is used) unbalanced "TS to TS" cables MUST be used.
You CAN use a "TRS to TRS", but then the RING and SLEEVE contacts must be bridged (shorted) in at least one of the TRS plugs. A balanced input then recognizes, just like the recommended use of an unbalanced "TS to TS" cable, that an unbalanced signal is to be fed in.
Best regards,
Chris
-
Yes, as already mentioned, all audio outputs of the Genos (as with all other Yamaha arranger keyboard models) are unbalanced. That means the RING contact of the output jacks is not connected internally. If you use a balanced cable (TRS to TRS plug), a balanced input (e.g. mixer, audio interface or active speaker) expects an input signal (minus phase signal) at the RING contact. But he only gets the TIP signal (plus phase signal). The minus phase input is therefore "open" (because, as mentioned, the RING wire of the cable is not connected in the keyboard output jack). This can lead to humming, and the resulting input signal is in many cases 6dB quieter (because the "minus phase" signal expected from the balanced input is missing). Therefore (if no DI box is used) unbalanced "TS to TS" cables MUST be used.
Thanks, Chris. I just ordered two of these (https://www.sweetwater.com/store/detail/CPP201--hosa-cpp-201-1-meter).
-
Thanks, Chris. I just ordered two of these (https://www.sweetwater.com/store/detail/CPP201--hosa-cpp-201-1-meter).
:) :)
Best regards,
Chris
-
Hi, for recording in cubase there is one very simple solution. You will find it in the preamp section of every single cubase inputchannel.
Please contact me, if you perhaps not exactly know where this "inputchannel preamp" to find is. You can give up to 48 dB of gainpower to your Genos signal.
You will find these section a little bit hidden. Open the channel equalizer and find it downside left.
But please remember: First step ist to FIND the "INPUT-CHANNEL-SECTION" of your Genos in the cubasemixer!!
Hope this can help you?
[attachment deleted by admin]
-
...please excuse me, this was the wrong photo in my last post.
[attachment deleted by admin]
-
Hi to Outlaw
You must be talking about the Pre-gain that you can bring up in the rack.
I got the genos up to about -33 Lufs's and used the pre-gain on the stereo input.
I have found if you up the gain over 10 db it can produce a noise floor on certain instruments that need more gain.
After looking at Chris's comments , i have decided to buy a good lead for the SPDF out from the Genos to my Focusrite 6i6.
There is a gain of +12db in the Utility on Genos.
if i combine that and some Cubase pre-gain things might even out hopefully.
Big thankyou for your input,much appreciated
I just need to get firing on all six 8) ;D
All the best
john
-
I just need to get firing on all six.
Or you could get one of those newfangled carbon-free sustainable electric brains, instead of your current gas guzzler. :D
-
I'm afaid that i have been a carbon guzzler as i paid £20 for a SPDF lead only to find out it is just a common RCA lead with gold tips.
I might be wrong but is there anything special in the SPDF lead??
Anyway i got the sound going with an ordinary RCA, but still cannot find the right combination for recording on my Focusrite 6i6.
So i have played safe and gone back to RCA until i try this special RCA lead.
I'm Confused here!! as a Carbon Guzzler!!! :-[
-
This (https://www.sweetwater.com/store/detail/DRA501--hosa-dra501-1-meter) is what Sweetwater advised me to use for the S/PDIF connection from my Genos to my 8i6 audio interface. It works perfectly.
Don’t forget to set your 6i6 audio interface to sync to the Genos clock.
-
Hi Michael
First i tried a RCA lead thinking that it would work and i got nothing.
It is when you mention using a SPDF that i started to think about it and Chris mentioned Thomann as we are in UK.
I googled and one is mono and SPDF carries a stereo signal.
I have ordered a SPDF lead from Thomann and now waiting for delivery
All the Best
John :)
-
Hi John,
In principle, such an S/PDIF cable is "only" a simple "RCA (= Cinch) male to RCA (= Cinch) male" cable, as is also used in the analog Audio sector. But in order to ensure the best possible digital signal transmission, especially for use with S/PDIF-compatible connections (Sony/Philips Digital Interface) a high-quality, double-shielded coaxial cable, ideally with gold-plated contacts on the connectors, should be used (e.g. the one I recommend from Thomann).
Best regards,
Chris
-
Hi Chris
Thank you very much for all of your explanations.
I now have to wait patiently for the lead as it has to clear customs plus another 3-4 days.
All the Best
John
-
Adding to Chris...
The key word is "co-axial" and it should be 75ohm impedance.
Why? S/PDIF carries a high-speed digital data signal and has special needs. It's not audio.
Hope the extra info helps -- pj
-
Hi
Chris did give me the exact specification with the lead from Thomann.
Chris gave me the link
if you magnify the cable up on their site you can see 75ohm written on the side of the cable.
It is a pain waiting for this cable as has not cleared customs yet and will take another 3-4 days once cleared and the flippin' postage is more than the cable's worth.
It will be wortht it!!! >:( ;D ;D ;D ;D ;D
-
Hi
I have had nothing but failure with this SPDF Business.
With RCA leads out of the Genos into the Focusrite 6i6 and usb to computer everything worked fine.
I tried all combinations plugging the SPDF lead to Focusrite.
The Genos worked ok , but getting vst's to sound was hopeless.
When i did get Vst working the Genos sound did not work
Once the Genos was working again even +6db in the Utility was enough to distort the sound.
I tried the front ports to no avail and got truly fed up and went back to my original setup.
I have to take the DXR leads out of the main outs and plug leads in that go to the Focusrite for recording and all of that goes out to my Focal Alpha monitors.
I tried putting my Dxr speakers on the line out next to the main out , but the Genos has no control over the volume.
I could possibly adjust the speakers volume though and leave the recording for main outs otherwise get a switch box for the speakers.
It can be a pig setting up things from Genos and also getting Cubase configured for each type of setup
That is where i am at at the moment floundering as i am not an electrically minded Boff and tend to get the railway lines mixed up!! ::) ;D
All the best John :)
-
Once the Genos was working again even +6db in the Utility was enough to distort the sound.
Hi John --
Just a thought after reading your comment.
+6dB doesn't seem like a lot -- it's only "6". But, +6dB is the same as amplifying the digital audio signal level by two (2).
If the digital audio waveform level is already near maximum (i.e., no digital headroom left), setting the digital out level to +6dB will cause the digital audio waveform to clip and distort. In other words, with the digital out level at +0dB, you may be getting all you can out of Genos already and need to boost/compress/limit the signal further down the digital signal chain, i.e., in the DAW software.
For the real tech nerds, the S/PDIF digital audio stream comes straight outta the SWP70 tone generator.
Dunno if this helps -- pj
-
Just in case it might be helpful, here’s how I have my rig wired. I am not using any of the front jacks on my 8i6. Digital audio to and from the PC is via USB. Digital audio from the Genos to the 8i6 is via S/PDIF.
Which speakers are you trying to get the VSTs to sound through? What are those speakers connected to?
[attachment deleted by admin]
-
Hi Michael
I use my Yamaha DXR8 On main out and that goes though a hum destroyer in between Genos and speakers.
They are quite a powerful pair ,but excellent quality down at the right levels
I then plug in the SPDF cable and route that to my Focusrite 6i6 and same as your diagram the USB on the Focusrite 6i6 goes to computer and back to the Focusrite and out the RCA's to my Focal Alpha 50's
Well that seems to be the right set up plugged up wise.
Update
I have got it all working.
I had to get logical
I sat at the machine and slowly had another set up go and got it right.
Played an orchestral sound and it recorded at 20 Luf's straight off, so that is in the ballpark for Cubase mixing.
It is on things like tambourines that need bumping up but as things like that are just enhancements to a song 30 Luf should be alright or even normalize low sounds like maraccas etc.
So now i can leave my DXR 8's in the main out and SPDF takes care of the recording and playback.
The only thing now is to get my vst instruments to play on the Genos.
I have one pair of AKG headphones on the Genos and a pair in the Focusrite 6i6 and my Focal Alpha monitors from the Focusrite RCA outs .
What i want now is to get the VST sound on the DXR 8's for my live practice and fun.
I realize that the VST's will not come back down the SPDF cable into the Genos .
Will i have to use my spare focusrite out 1 an 2 sockets with RCA leads to the Genos AUX in ?
At the moment i cannot get a receive instrument audio.
I have Arturia VST 's and Korg plus Sampletank and i have all the Arturia and Korg synths as standalones as well as for Cubase and all running at buffer size 256 smoothly at 5 ms latency. Not bad that.
I like to say to everyone it is best to get a fast music computer purpose built with a 32gig drive.
Computer side of things are no worries especially with system images made. Always keep two on separate terrabyte drives.
This saves all the heartaches of losing everything
All the best
John :)
-
I ran into a nasty feedback problem when I tried to do what it sounds like you are doing. The problem is that when you route analog audio from your 6i6 audio interface to the Genos via AUX IN, it comes right back out again on the S/PDIF digital audio cable.
I think you would be much better off routing your VST audio output through the speakers attached to your audio interface. I do not have any speakers attached to my Genos.
-
Hi Michael
It must be easier for you being a software developer and Computer Science instructor
even being retired!! :) All i ever got was a Doctorate of Madnesss certificate ;D :o :P
Well, I have got as far as you pointed out again and yes i can play through my Focusrite monitors.
They are flat response but i would like to get my standalone Vsts going out of the Genos into my DXR8's.
So if a signal like audio goes into the aux in on the Genos, does that mean it goes straight back automatically down or up the SPDF output?? ;D ;D or up the spout! :P
I am surprised that there is not a box that you can untick to stop the signal from going around again from the spdf.
-
... So if a signal like audio goes into the aux in on the Genos, does that mean it goes straight back automatically down or up the SPDF output?? ;D ;D or up the spout! :P
I am surprised that there is not a box that you can untick to stop the signal from going around again from the spdf.
Hi John,
The S/PDIF digital output always has the same mix as the Line Out Main jacks, Aux Out jacks (if Sub Out 3/4 jacks are configured as AUX Out) and the Headphones jack.
Best regards,
Chris
-
Hi Chris
So whatever comes in the AUX IN will go out of the main out and spdf similtaneously.
All the best
John :)
-
It must be easier for you being a software developer and Computer Science instructor even being retired!! :)
It’s easier now. Believe me, though, I paid my dues in spades, hitting my head against the wall developing software. :D
All i ever got was a Doctorate of Madnesss certificate ;D :o :P
They don’t just award that degree in music; I have that same degree from my field. :D
-
So whatever comes in the AUX IN will go out of the main out and spdf similtaneously.
If you decide to try this, make sure to wear ear protection!
-
Hi Chris
So whatever comes in the AUX IN will go out of the main out and spdf similtaneously.
All the best
John :)
Yes, this is correct, John.
If you are "experimenting" with the AUX IN, you should always keep an eye on the Aux In volume control (Mixer > Panel > Page 2) and make absolutely sure that the S/PDIF or Line Out Main signal is not fed back into the Genos AUX IN via the computer.
Best regards,
Chris
-
Hi Michael and Chris
Have you ever noticed no matter what we try there is always a block in the way with routing keyboards and programs.
Well i have to settle for playing the Genos with the DXr's and for recording the Genos and VST will combine using the Focusrite and Focal Apha's to monitor check before going back to hedphones just to make sure all stereo is where it should be before final mixdown
So multi-tracking is no problem out to my Focal alpha monitors.
I am really hoping that the next Genos will have a much larger sample memory as i can get samples out of Sample Robot so the Genos will play them. Sample Robot is great but the Sf2 's are very large on the memory of the Genos. The way around that is to sample the octaves that is needed and cut down the amount of notes to sample in an octave.
Anyway it is all fun. :)
All the best
John :)
-
If you decide to try this, make sure to wear ear protection!
This is no joke! :o
I don't know how many times that I've accidentally -- and painfully -- blasted my ears when connections go awry.
Please protect your hearing -- pj
-
I don't know how many times that I've accidentally -- and painfully -- blasted my ears when connections go awry.
Me too. Not fun! :(
The most recent time was when I tried what John is trying.
-
Well i have to settle for playing the Genos with the DXr's and for recording the Genos and VST will combine using the Focusrite and Focal Apha's to monitor check before going back to hedphones just to make sure all stereo is where it should be before final mixdown
I am getting by fine with just one set of speakers connected to my 8i6 (and no speakers connected to the Genos). I also have a set of headphones connected to the headphone jack on my 8i6.
Is there some reason why you need a set of speakers connected to your Genos? It seems to me that you may just be creating extra trouble for yourself.
-
Hi Michael
I use the Focal Alpa 50's when i record in cubase as they are nearfield flat response monitors for mixing.
When i just want to play ,i use the DXR8's from main out of the Genos as they are not flat response speakers.
I do not use both set of speakers on at same time.
When just playing the Genos , the Focusrite is not switched on.
I was just hoping that i could of got the vst sound on the Gens upper half whilst still using styles for live play.
I have not tried what you have done yet and by the sound of it, it's is a no go.
I nearly blasted my ears out when i first used room correction with a mic plugged into the Focusrite for Sonarworks.
I had to do about 35 room positions with a mic. I purchase Sonarworks and that works a treat for my room and Headphones.
T he front gains were up for some reason when phantom power is used. That was like a Motorhead blast and nearly got the Ace of Spades!! ;D
-
John,
You have two distinct stereo analog audio output channels available to you on the back of your 6i6. You could connect both of your speaker sets to your 6i6, and then mute whichever set you don’t want to hear using the Focusrite Control app (https://focusrite.com/en/focusrite-control) on a PC or Mac or iOS.
That’s how I switch between my speakers and my headphones.
-
Hi Michael
Thanks for the suggestion, i may give that a go later as it means crawling under the desk again.
It feels like the days when playing with your Christmas Electric Train Set ;D :P
I must admit i had more trouble with Scalectrix!!lol ;D
All the Best
John :)
-
Hi John
Could you not simply use an audio switch, they are quite cheap.
Bill
-
Hi Bill
I will look into that.
The thing is that all is set up with SPDF and now working.
I now can send a live play song over to Cubase for some little editing
Once the song is in Cubase and all set up i can now hear the playback through the Yamaha driver connection over headphones plugged into the Genos.
Now i can record to audio track and hear the result over my second pair of headphones in the Focusrite 6i6 but only with the Genos switched on.
Michael suggsted that i hall running through the Focusrite 6i6. I could have a go at that.
I have found that if i go to my Focusrite mixer pane. on the computer , i change after recording the SPDF to Internal i now hear audio coming through and also if i had instrument tracks from vst.
To sum up, everything from midi to recording also with vst included is fine.
So i just switch From SPDF to internal on the Focusrite.
If i did want to have VST playing along with the Genos there seems to be something that gets in the way every time.
I tried split points on the vst and that worked , but it always interfere's with the Styles and everything goes clinkiyty clank Clunkley Klonk in perfect time. it is just sounds like that Geman Rock band FAUST!!! ;D ;D ;D
-
How are you getting analog audio from Cubase to the Genos? Are you connecting audio output from the 6i6 to AUX IN on the Genos? If that’s what you are doing, how are you avoiding a feedback loop via the S/PDIF cable?
EDIT:
I just figured something out. You can defeat the feedback loop by using the Focusrite Control app to mute S/PDIF input to the Scarlett outputs that are connected to AUX IN on the Genos. When I ran into the feedback problem, I was not yet familiar enough with the Focusrite Control app to realize this was possible.
It’s taken almost a year, but I am starting to really understand this rig I have built.
-
Hi Michael
I am not get audio from Cubase to Genos
I can do if i sample a vst sound in Sample Robot and convert to Sf2
I make a song and then put midi into Cubase for editing.
I then turn to wave file.
The way now that i hear audio is with headphones and Focal alpha monitors out from the Focusrite 6i6
from there i do not need the Genos on as i can then mix and master with Neutron 4 and Ozone10.
So if i have midi in cubase and want to record to wave , then the siganl goes back into the Genos and out to spdf to the focusrite 6i6 In.
The sound that i recorded sounds sharper , sort of more treble in there.
When i turn off Sdpf in the Focusrite mixer and put it on Internal all sounds normal ,but this time i am on 20Luf's which is in the ballpark
I wonder if you wonder what i am on about , but i am not an expert in the electrical field.
-
The sound that i recorded sounds sharper , sort of more treble in there.
That’s the advantage of the S/PDIF connection. You avoid two conversions: digital to analog coming out of the Genos, and then analog to digital going into your PC. Each of those conversions degrades the quality of your audio.
I wonder if you wonder what i am on about , but i am not an expert in the electrical field.
I don’t wonder about that at all. I have found this comment thread to be very interesting and useful, and I hope I have managed to help you at least a little.
-
Hi Mike
I hope everything now stays stable
All the best
john :)