PSR Tutorial Forum

Genos (12 Boards) => Genos Voices & Revo Drums => Topic started by: PAFF on December 13, 2021, 05:05:20 PM

Title: Breath control
Post by: PAFF on December 13, 2021, 05:05:20 PM

Is it possible to assign line output for brass and woodwind voices?

Title: Re: Breath control
Post by: mikf on December 13, 2021, 05:07:49 PM

If you mean for only those voices then no.
Mike

Title: Re: Breath control
Post by: Fred Smith on December 13, 2021, 05:27:44 PM

Quote from: PAFF on December 13, 2021, 05:05:20 PM

Is it possible to assign line output for brass and woodwind voices?

You can assign outputs to Right1, Right2, Right3, etc.

If you always assigned brass and woodwind to Right1, for example, and other voices to Right2 or Right 3, then you could make it work.

Cheers,
Fred

Title: Re: Breath control
Post by: PAFF on December 13, 2021, 05:58:57 PM

Thankyou for the advices. I just realized that line out setting can be stored in the registration in other words that I can assign for instance a sax to sub out in memory 1 and a piano to line out in memory 2 and so on.A mixer is of course necessary.

Title: Re: Breath control
Post by: overover on December 13, 2021, 08:10:24 PM

Hi PAFF,

Please note that only Insertion Effects can be applied to the sound output from the SUB output jacks. System Effects (Chorus, Reverb, and Variation Effect when is set to "System") will NOT be applied.

It should also be noted that the SUB output jacks have a fixed volume, i.e. they are NOT affected by the master volume control.


Best regards,
Chris

Title: Re: Breath control
Post by: PAFF on December 14, 2021, 12:48:03 PM

Thankyou all for the good advices. I decided to find another solution.
Best regards
Pär