PSR Tutorial Forum

PSR Keyboards (11 Boards) => PSR-SX900/SX700/SX600 => Topic started by: janamdo on September 30, 2021, 01:08:04 PM

Title: Easy way to play piano on SX600
Post by: janamdo on September 30, 2021, 01:08:04 PM

There is no piano mode on SX600, so how do i get easy a piano sound on the whole keyboard ?

Title: Re: Easy way to play piano on SX600
Post by: reya on September 30, 2021, 03:18:46 PM

When Genos, SX900 or SX700 are powered on, a piano voice is by default selected (active) on the entire keyboard key range.

Are you saying SX 600 behaves differently ?

Title: Re: Easy way to play piano on SX600
Post by: Fred Smith on September 30, 2021, 03:24:46 PM

Quote from: janamdo on September 30, 2021, 01:08:04 PM

There is no piano mode on SX600, so how do i get easy a piano sound on the whole keyboard ?

You need to remove (or adjust) your split point. Or, select the same piano voice for both left and right parts.

Cheers,
Fred

Title: Re: Easy way to play piano on SX600
Post by: janamdo on September 30, 2021, 03:49:45 PM

Quote from: reya on September 30, 2021, 03:18:46 PM

When Genos, SX900 or SX700 are powered on, a piano voice is by default selected (active) on the entire keyboard key range.

Are you saying SX 600 behaves differently ?

Thanks
I don't know if the SX600 now is in his default state ?
The acmp is not lit ,but the styleselection are lit, so the piano is not playing in the acmp section 

Title: Re: Easy way to play piano on SX600
Post by: janamdo on September 30, 2021, 03:51:31 PM

Quote from: Fred Smith on September 30, 2021, 03:24:46 PM

You need to remove (or adjust) your split point. Or, select the same piano voice for both left and right parts.

Cheers,
Fred

Thanks
Selecting the same piano sound for both keyboard oparts seems to me the most convenient.

Title: Re: Easy way to play piano on SX600
Post by: mikf on September 30, 2021, 05:10:20 PM

I don't have an SX600 but on all Yamaha arrangers I am familiar with if you select full keyboard fingering mode and then your favorite piano voice you should get piano on the full keyboard. I imagine this also work on SX600.This is the way most piano players would use this.  And if you use accompaniment when set this way and it will respond to all notes played. There is no need to change the split point doing it this way.
Mike

Title: Re: Easy way to play piano on SX600
Post by: DerekA on September 30, 2021, 05:35:45 PM

Just make sure that the LEFT voice is not active, and only R1 voice is active with the Piano selected.

And this should be the default when it powers on .....?

Title: Re: Easy way to play piano on SX600
Post by: janamdo on October 03, 2021, 09:34:43 PM

Quote from: mikf on September 30, 2021, 05:10:20 PM

I don't have an SX600 but on all Yamaha arrangers I am familiar with if you select full keyboard fingering mode and then your favorite piano voice you should get piano on the full keyboard. I imagine this also work on SX600.This is the way most piano players would use this.  And if you use accompaniment when set this way and it will respond to all notes played. There is no need to change the split point doing it this way.
Mike

Thanks
Indeed, a used full keyboard fingering mode now a few days ago back and with ACMP on there is also chord detection.

Title: Re: Easy way to play piano on SX600
Post by: janamdo on October 03, 2021, 09:43:43 PM

Quote from: DerekA on September 30, 2021, 05:35:45 PM

Just make sure that the LEFT voice is not active, and only R1 voice is active with the Piano selected.

And this should be the default when it powers on .....?

Thanks
I just check this and its default as you mention.