PSR Tutorial Forum
PSR Keyboards (11 Boards) => PSR-S910/S710 (SFF2) => Topic started by: Shadow on September 05, 2021, 01:31:30 PM
-
How do I turn off speakers in a 910 and use in house sound board?
Thanks Shadow
-
You might try plugging the house speaker system into the ear phone jack on the 910.
That automatically shuts the internal speakers by default
Regards.
Ron
-
Hi Shadow,
With the S910, the internal speakers can only be muted by connecting headphones to the PHONES socket or alternatively by plugging in a 6.3 mm TRS plug/adapter (see pictures). Switching off the internal speakers via the Utility menu (as with newer/larger models) is not possible with the S910.
(https://thumbs.static-thomann.de/thumb/bdbmagic/pics/prod/165014.jpg)
(https://www.picclickimg.com/d/l400/pict/352217565041_/35mm-Jack-to-63mm-Jack-Stereo-RIGHT-ANGLE.jpg)
P.S.
Connecting an external amplifier system to the PHONES socket using a suitable cable (e.g. stereo TRS plug > 2 * mono TS plug) is possible, but not ideal. I recommend using the Line Output sockets L/L+R and R (and, if needed, muting the internal speakers as described).
Best regards,
Chris
-
I do not recommend using any plug that sticks out beyond the keyboard case - too easy to accidentally hit it and break the tiny board inside the keyboard. Instead, purchase an inexpensive 1/4-inch guitar cable, then using a hacksaw remove the entire back end of the plug, leaving just the forward end of the plug and a small lip to grasp in order to remove it when necessary. No chance of any accidental encounter while playing. I filled the inner contact areas with hit melt glue to hold everything together and provide good insulation between the tip and shield contacts.
https://app.box.com/s/egtgmx7p9rk9dhr3sgwldb3knzpoo6kt (https://app.box.com/s/egtgmx7p9rk9dhr3sgwldb3knzpoo6kt)
https://app.box.com/s/1asudln0d9kcmk3xek0s2ip77raa47hk (https://app.box.com/s/1asudln0d9kcmk3xek0s2ip77raa47hk)
I do not recommend playing and having the onboard speakers turned on while performing. This is because you PA system may not be functioning, but you would be unaware of it because you are predominately hearing the onboard sound system. I only had this happen once. Some one had come up to request a song, and inadvertently stepped on the power cable to my Bose L1 Compact and pulled it out of the wall outlet. I could not understand why people kept motioning me to turn the volume up - they were only hearing the onboard keyboard speakers - not my Bose L1 Compact. It was quite embarrassing, to say the least.
Good luck,
Gary 8)
-
@travlin-easy
Hi Gary,
Your idea of cutting off a jack plug so that it protrudes as little as possible over the keyboard case when plugged in is basically a good one. BUT: You should definitely use a STEREO jack plug (TRS), because if a MONO jack plug (TS) is plugged into the PHONES socket, one channel of the headphone output is permanently short-circuited. This creates the risk of damaging the headphone amp.
Best regards,
Chris
-
If you look at the schematic, you will see that it is activated by a leaf switch on the jack, which is opened automatically regardless of the plug that is inserted. Stereo or mono jacks open the leaf switch when inserted.
All the best,
Gary 8)
-
Gary,
I still use the modified jack you sent me 15 yrs ago, a belated thanks again.
-
If you look at the schematic, you will see that it is activated by a leaf switch on the jack, which is opened automatically regardless of the plug that is inserted. Stereo or mono jacks open the leaf switch when inserted. ...
Yes, of course that's true, Gary. The internal speakers of the S910 are muted, regardless of whether a stereo (TRS) or mono (TS) plug is plugged into the Phones jack.
However, my previous note relates to something else: When you plug a mono (TS) plug into the stereo headphone jack, the right channel of the headphone output (which is at the RING contact of the TRS jack) is short-circuited to ground via the sleeve contact of the mono (TS) plug. And this means there is a risk of damaging the output stage of the headphone amp.
Therefore, as I said, I recommend using a stereo (TRS) plug (the three contacts of which are isolated from each other) or a TRS headphone adapter plug, as shown in the picture above.
Best regards,
Chris
-
There are two current limiting resistors in each leg of the L/R headphone feed. These pass adequate signal for the headphones and provide protection for short circuits at the jack. Most gear I've ever worked on utilizes resistors like this for protection of the headphone output stage.
I use an 1/8" to 1/4" TRS adapter that doesn't stick out much and comes with most good headphones. Occasionally forget it's there and wonder why I don't get sound from the onboard speakers :P
[attachment deleted by admin]
-
I've never had that problem, Chris, in more than 30 years of performing daily and a dozen arranger keyboards, Yamaha, Korg, Roland, etc... And, as Bernie noted above, he still is using the one I made for him 15 years ago. I don't believe this is a problem, Chris.
All the best,
Gary 8)