PSR Tutorial Forum

Yamaha Keyboards (4 Boards) => Yamaha Keyboards - General => Topic started by: Musicnik on April 17, 2021, 09:07:07 AM

Title: Vocoder on Tyros 2
Post by: Musicnik on April 17, 2021, 09:07:07 AM
Hello everyone! Can you please tell me, how should I use the vocoders on Tyros 2?
Title: Re: Vocoder on Tyros 2
Post by: Keyboard Master on July 15, 2021, 07:31:37 PM
There should be mic setting. If I’m not mistaking try looking through the functions of the keyboard 🎹 and see if you see anything that is to do with Vocal setup. etc.
Title: Re: Vocoder on Tyros 2
Post by: travlin-easy on July 15, 2021, 10:17:59 PM
Though I have not used this on the Tyros series, I know that it is fairly user friendly. Essentially, you need to create a special registration to save the startup information, mic settings, vocoder settings, pedal settings, volume setting, etc. Next, Press the mixing console button, tab to the effects tab, then press the mixing console button repeatedly until you see the mic tab at the bottom of the page. From here you can edit the effects that you wish to use on the mic settings, reverb, echo, delay, etc. You will have to experiment with these settings using a high quality mic, such as the Samson Q9 or Sennheiser E-855, Crown CM-311A or any comparable mic. The quality of the mic makes a huge difference in vocal quality.

Hope this helps,

Gary 8)