PSR Tutorial Forum
Tyros Keyboards (5 Boards) => Tyros 5 (SFF2) => Topic started by: repetedj on September 11, 2020, 06:37:49 AM
-
Hello,
I have 8 different voices assigned to the each registration buttons. When I save the registration, the volume of the voice is also saved. As an example 115
I want to be able to set the Master EQ for Right1 using the Balance button to 95.
When I load the registration and press one of the buttons, the Right1 volume reverts back to whatever the volume was(115) when it was saved.
I would like Right1 to stay at 95. I tried Freeze/Voice checked and this prevents the Right1 from being changed but when I press a different registration button the Freeze prevents the Voice from changing.
Can this be done? Is there a way to lock the Balance volumes so that it doesn't change when a registration is loaded?
Thanks
-
Hello Sorry for the late response,I just read your inquiry today.
You can do this . I do it all the time.
Bring up your registration as if you are going to use it.
then press mixing console There you can adjust the volume of the voice. No problem; I am sure you are doing this, right.
at this point you must reregister the new voice settings. So press memory, then the registration number You now have a new registration with the setting you were looking for..you can do this quickly and effortlessly anytime you wish with a little practice
Hope this Helps
regards.
Ron
-
Ronbo,
Thanks for the reply. I was not re-saving the registration. I followed your instructions and it all works great now.
Thanks