PSR Tutorial Forum

PSR Keyboards (11 Boards) => PSR-SX900/SX700/SX600 => Topic started by: KeyboardEd on April 24, 2020, 03:21:48 AM

Title: Tempo Variable with FC-7 (Rubato)
Post by: KeyboardEd on April 24, 2020, 03:21:48 AM

I've always wanted an easy way to play rubato with these workstations, especially for accompanying vocalists. The free styles have been my solution so far.

This is what I found to control/vary the Master Tempo with an FC-7:

Activate the 'direct access' and move the FC-7 to get to the setting screen. Touch 'Foot pedal 2' (that's where mine is plugged into): in Category go to Overall (pg. 2 of 2); in Function, go to Master Tempo (pg. 2 of 3).

I'm sure there are other ways to do this but for now this will do for me. It's a function I have wanted for a long time and didn't even know it was available on the SX900.

This may be old news for many of you but for me this is a great find. -Ed L.

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: hans1966 on April 24, 2020, 06:51:53 AM

Wow KeyboardED, Thanks so much for the info. a very useful function both for accompanying singers and for performing as a soloist. Greetings. Hans

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: KeyboardEd on April 24, 2020, 07:30:58 PM

Thank you Hans,

This is a control feature I've been hoping to have for a long time.

I would like to say I researched the documentation and located the procedure but that is not true. I was really just messing around with the menu system for familiarity when I found the setting by dumb luck. -Ed L.

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: ton37 on April 24, 2020, 07:55:12 PM

Good 'Lucky founding', KeyboardEd. OK, it is in the Ref.manual, but it doesn't harm to bring to our attention  ;)

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: Toril S on April 24, 2020, 11:32:13 PM

Is it on the S975 too?

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: KeyboardEd on April 25, 2020, 02:05:23 AM

Toril,

I am not sure if that (foot control of tempo) is a function available on the S975 et al. My last PSR was an S950 and that version did not have an easy way to vary tempo during live performance. At least to me it did not. -Ed L.

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: Toril S on April 25, 2020, 11:47:24 AM

Thanks Ed L😀

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: overover on April 25, 2020, 12:36:46 PM

Quote from: Toril S on April 24, 2020, 11:32:13 PM

Is it on the S975 too?

Hi Toril,

I looked in various Reference Manuals and came up with the following result:

With Genos and PSR-SX models, the "Master Tempo" function is available for a connected Foot Controller Pedal (FC7).

Unfortunately, this function is NOT available on Tyros and PSR-S models for a connected Pedal.


Best regards,
Chris

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: ton37 on April 25, 2020, 12:39:14 PM

Hi Toril, For your info and to be sure: it can not be done with the S975.  :(  (Look at page 118 of the Ref.Manual.)

(Was a double post with @Chris)

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: pmedina on April 25, 2020, 02:53:31 PM

Hi ton37, Then it's also for my PSR S950. I am Sorry because I've looked for that change of tempo.

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: EileenL on April 25, 2020, 02:57:06 PM

As far as I know it is only available on the new keyboards Genos and SX900.

Title: Re: Tempo Variable with FC-7 (Rubato)
Post by: Toril S on April 25, 2020, 04:19:40 PM

Thanks Chris, Ton and Eileen!