PSR Tutorial Forum
Genos (12 Boards) => Genos - General => Topic started by: khamhou2017 on April 09, 2020, 11:08:25 PM
-
Help I can't make change to my midi songs volume
After I upgrade to the new V. 2.01...when I go to Stepeidt on my midi song I don't see the volume on the midi Ch... How would I make change or go to make change to volume on the midi Ch ?
-
Help I can't make change to my midi songs volume
After I upgrade to the new V. 2.01...when I go to Stepeidt on my midi song I don't see the volume on the midi Ch... How would I make change or go to make change to volume on the midi Ch ?
Hi khamhou2017,
please check "Event Filter" in Step Edit display. Possibly the Volume events (Ctrl #7) are filtered out.
If you have only ONE Volume event per Channel (at the beginning of the Song), you can also use the Mixer to set the Channel Volumes:
- Go to MIDI Multi Recording and open a MIDI file. Then call up the Mixer (e.g. using an Assignable button) and make the desired adjustments.
- Then exit the Mixer to come back to MIDI Multi Recording. Go to "Setup" (refer to page 81 in Genos Reference Manual).
- Now press SONG STOP button to set the Song to the beginning (!)
- In the "Setup" window, be sure to have ticked ALL the boxes in the first (top) and second row, but normally do NOT tick any boxes below (!)
- Press "Execute", and then save the Song again (it is best to choose a new / changed file name).
P.S. The current Genos Firmware version is 2.02 ;)
Best regards,
Chris