PSR Tutorial Forum

PSR Keyboards (11 Boards) => PSR-SX900/SX700/SX600 => Topic started by: mronemanband on March 01, 2020, 10:25:44 PM

Title: Style Editing
Post by: mronemanband on March 01, 2020, 10:25:44 PM
I would like to edit the style by  copying the Ending from one style and applying it to another style.  Is it possible to do it inside PSR SX900 ? Really appreciate your advice !
Title: Re: Style Editing
Post by: BogdanH on March 01, 2020, 10:39:12 PM
hello,

Yes, it's possible and kinda easy.. so I don't copy/paste "how to..", take a look in Reference manual, 1st chapter (Styles) and then look after "Assembly" -is almost at the end of that chapter.
But truth is, manual doesn't describe the procedure that well.. so you'll probably need to practice a bit to find out what's going on. And at some point, you'll say "ah, that's all I need to do?"  :)
Wish you fun.. be creative

Bogdan
Title: Re: Style Editing
Post by: panos on March 01, 2020, 10:53:42 PM
Hi mronemanband,
This video is for Genos.
Similar procedure I guess is for the SX too.
https://www.youtube.com/watch?v=mi9BfAcD05M (https://www.youtube.com/watch?v=mi9BfAcD05M)

A video for the psr s and tyros series:
https://www.youtube.com/watch?v=ZgGatUmhVqw&t=217s (https://www.youtube.com/watch?v=ZgGatUmhVqw&t=217s)
Title: Re: Style Editing
Post by: DrakeM on March 02, 2020, 12:03:41 AM
Here is a video that I put together to show you how it is done.

https://www.youtube.com/watch?v=1rJbNQom07w

I use this method every week in order to create all of my custom song styles.

Regards
Drake
Title: Re: Style Editing
Post by: EileenL on March 02, 2020, 12:12:05 AM
This My Help

Style Assembly
Have you ever used a style and thought “I like this style but I do wish it had a different Intro or I wish it had that piano section that is on another style” This is exactly what you can do using Style Assembly in the Style creator.
You just need to do a little preparation beforehand to make this easier and save you darting back and forth to different sections. Firstly select the style you want to create. I have selected Midnight Swing in Swing and Jazz section. I am now going to save this to my user drive. I want to copy the intro and certain sections from Movie Swing 2 in Movie and Show section. I now save this to my user drive. As I mentioned this will save you time having to go between the different folders as we progress. Because I am going to change Intros I firstly need to check the amount of bars in the style I am copying from. In this case it is nine.
Now go to your user section and select Midnight Swing. Press Menu and select page two. On the Basic Page Press Intro Three and you will then see the details of how many bars it uses which is four. Press Pattern length and change to Nine and press execute. Now tab to assembly page. You will now see all the Style sections and the left column says Copy From and you will see it says Midnight Swing in all the sections. Press the part you want to change and go to user and select Movie Swing. You will now see Movie Swing in that place instead of Midnight Swing which means the part has been copied. Continue in this way until all parts are copied. You can press the start/Stop button on the style to listen to it If you also want to change the ending then it is the same procedure. Always remember first to check the amount of bars in each style and adjust accordingly. Once done now save giving it a new name to where you want it. Either to User or USB.