PSR Tutorial Forum
Tyros Keyboards (5 Boards) => Tyros 5 (SFF2) => Topic started by: moshe israeli on January 23, 2020, 03:32:34 PM
-
I have a question about the trs ms05 loudspeaker system that can be used for tyros5
and I need to know if I can use it with tyros 3 …???
-
No as Tyros 5 uses a different wiring system.
-
I have a question about the trs ms05 loudspeaker system that can be used for tyros5
and I need to know if I can use it with tyros 3 …???
Hi moshe israeli,
YES, "seen electrically" you CAN use the TRS-MS05 speaker system with Tyros3!
To do this, use the original combination cable that comes with the TRS-MS05: Connect the 6,3 mm phone plugs to the Line Out Main jacks of the Tyros3 (the two jacks "L/L+R" and "R"). This is exactly the same as on Tyros5. (In difference to Tyros3, Tyros5 has NO multi-pin connector for the speakers.)
Then connect the satellite speakers to the RCA (Cinch) plugs of the combination cable and connect the multi-pin plug to the subwoofer (R) and the remaining RCA (Cinch) plug to the subwoofer (L). I have attached a picture that shows all the connections.
The Speaker Brackets of the TRS-MS05 should also can be used with the Tyros3, but I did not test this so far.
P.S.
On Tyros3, the "Headphone Switch" (in Utility menu) does NOT affect the Line Out Main jacks (as is on Tyros5). That means the speakers can NOT be configured to be automatically switched off on connecting a plug to the headphones jack.
Best regards,
Chris
[attachment deleted by admin]
-
thanks a lot for this information.
-
thanks a lot for this information.
Hi moshe israeli,
thanks for your feedback!
I'm glad to could help you! :)
Best regards,
Chris