PSR Tutorial Forum

PSR Keyboards (11 Boards) => PSR-E Series => Topic started by: anon125 on January 20, 2020, 10:58:51 PM

Title: e363 463
Post by: anon125 on January 20, 2020, 10:58:51 PM

I cannot seem to easily change the split volume on our old 313. It may be faulty, never see the spli in the screen.
How would I do this on the e363 or 463?
Thanks guys

Title: Re: e363 463
Post by: SeaGtGruff on January 21, 2020, 12:52:06 AM

You would go into the Function menu and set the S.Volume to the desired level.

The quickest way to get to the S.Volume function is to press and hold the SPLIT button until the S.Voice function is displayed, then advance from there to the S.Volume function.

Title: Re: e363 463
Post by: anon125 on January 21, 2020, 01:13:23 AM

Lots of clicks on the function button!
How would I do this on the 363 463?
Thanks

Title: Re: e363 463
Post by: SeaGtGruff on January 21, 2020, 07:20:11 AM

The same way. As I said, the quickest way to get to the desired function is to press and hold the SPLIT button until the S.Voice appears, then advance to the S.Volume function.

Title: Re: e363 463
Post by: anon125 on January 23, 2020, 01:10:26 AM

thanks