PSR Tutorial Forum
PSR Keyboards (11 Boards) => PSR-S910/S710 (SFF2) => Topic started by: ivtec on September 10, 2019, 05:09:38 PM
-
Hi guys ,i don't know if this ever been asked. Psrs 910 , i have a pedal control mostly to use as fill in , but it comes from default in sustain , is there any way i can set to Fillself mode to always be there when i reboot keyboard ,it's an hassle every time i turn on instrument i have to go and change from sustain to fillself or others ?
-
Hi,
As far as I know you can figure it in a registration. One registration that you Always use or the registrations you use for each (song)style.
Ragards <> Piet
-
Hi guys ,i don't know if this ever been asked. Psrs 910 , i have a pedal control mostly to use as fill in , but it comes from default in sustain , is there any way i can set to Fillself mode to always be there when i reboot keyboard ,it's an hassle every time i turn on instrument i have to go and change from sustain to fillself or others ?
The way you do this is to create a Setup registration, which has all the default settings you want. You load this registration every time you power on.
An alternative is to upgrade to a Genos, where pedal settings are remember though a Power Off/On cycle.
Cheers,
Fred
-
Thanks guys.
-
Good advice from Fred Smith. There is an interesting article in the lessons that show you how to setup a style at power on to customise your settings, even the voice and then to freeze it. I use it all the time because you cannot play in a band and now you sound like an organ and then like a guitar. My two pedals are permanently set to Page Down and Fill In. I can look it up if you have not come right.