PSR Tutorial Forum

Genos (12 Boards) => Genos Registrations & Playlist => Topic started by: Tonny on January 16, 2019, 04:22:54 PM

Title: Include/store fade-out in a registration: any ideas?
Post by: Tonny on January 16, 2019, 04:22:54 PM

I want to include a fade-out in a registration so that I can use it as part of a registration sequence to end my play. Just as you would when storing an ending (1, 2 or 3) in a registration. I have not found how to do it.  When I store a registration with the fade-in or fade-out button lighting, it will be switched off when I later recall the registration. So that does not work.  Any ideas?

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: tyrosaurus on January 16, 2019, 05:06:34 PM

You can't store Fade In or Out in a registration.

The best that you can do is to assign the function to one of the Assignable Buttons, or to the Rotary Sp/Assignable Buttons.

Alternatively, if you don't want to use your hands to press a button, you can assign it to a foot pedal.


Regards

Ian

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: Al Ram on January 16, 2019, 05:12:48 PM

I have the same problem . . . . Fade in/out not saving to registrations. 

At least now i know that it cannot be saved to registrations.  However, i have assigned it to the F assignable button but it does not hold.    It only works for that one time when i assign it but not later.

I believe it has something to do with the checkmarks in the registrations that follow after the assignment.

thanks

 

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: Fred Smith on January 16, 2019, 05:22:55 PM

Quote from: Al Ram on January 16, 2019, 05:12:48 PM

I have the same problem . . . . Fade in/out not saving to registrations. 

At least now i know that it cannot be saved to registrations.  However, i have assigned it to the F assignable button but it does not hold.    It only works for that one time when i assign it but not later.

I believe it has something to do with the checkmarks in the registrations that follow after the assignment.

Your last paragraph is correct. You may be assigning Fade to a button, but your other registrations are unassigning it.

The way I do it is have my assignments in a setup registration which I load after a power on. Then every other registration does not have Assignable Buttons memorized.

It would be nice if Assignablr Buttons was in Parameter Lock, butfor now, it’s not.

Cheers,
Fred

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: Al Ram on January 16, 2019, 07:29:15 PM

Quote from: Fred Smith on January 16, 2019, 05:22:55 PM

The way I do it is have my assignments in a setup registration which I load after a power on. Then every other registration does not have Assignable Buttons memorized.

Fred

Thanks Fred.  Your solution is good. !!!

do you happen to know if a program like Murray's would analyze from 1 up to 10 buttons on each registration and uncheck the assignable check mark on each registration button ?

thanks in advance.

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: pieterpan on January 16, 2019, 09:32:15 PM

Hi,

You can use MixMaster to make your style fade out (or in) - so  that it is stored in the style.

Regards <> Piet

Title: Re: Include/store fade-out in a registration: any ideas?
Post by: Fred Smith on January 17, 2019, 12:08:41 AM

Quote from: Al Ram on January 16, 2019, 07:29:15 PM

Thanks Fred.  Your solution is good. !!!

do you happen to know if a program like Murray's would analyze from 1 up to 10 buttons on each registration and uncheck the assignable check mark on each registration button ?

Yes, it will.

Cheers,
Fred