PSR Tutorial Forum

Genos (10 Boards) => Genos Speakers / Foot Pedals => Topic started by: latingate on December 14, 2018, 06:56:02 PM

Title: Pedals 1&2 not working
Post by: latingate on December 14, 2018, 06:56:02 PM
Pedals 1 & 2 are not working. only pedal #3.
I've tried with various functions and switched polarity.
Also tried with 2 different pedals.
What can be the problem? (I hope it's not a hardware issue..)
Thanks
Title: Re: Pedals 1&2 not working
Post by: tyrosaurus on December 14, 2018, 07:46:30 PM
Check to see if you have 'Registration Sequence' turned on by pressing 'MENU' > 'Regist. Sequence'.

If the 'Sequence' button on this page is turned on, any pedals that are assigned to 'Regist+' and 'Regist-' will carry out these functions rather than their defaults or what you have assigned to them.

If it is turned on, simply turn 'Sequence' off and see if this restores 'normal' functionality.


Regards

Ian 
Title: Re: Pedals 1&2 not working
Post by: latingate on December 14, 2018, 08:42:34 PM
Great !!
This was the problem..

Thanks a lot

Check to see if you have 'Registration Sequence' turned on by pressing 'MENU' > 'Regist. Sequence'.

If the 'Sequence' button on this page is turned on, any pedals that are assigned to 'Regist+' and 'Regist-' will carry out these functions rather than their defaults or what you have assigned to them.

If it is turned on, simply turn 'Sequence' off and see if this restores 'normal' functionality.


Regards

Ian