PSR Tutorial Forum

Genos (12 Boards) => Genos YEM & Expansion Packs => Topic started by: Francesco Massa on October 23, 2018, 02:56:44 PM

Title: Metal Guitars for Genos v2.0
Post by: Francesco Massa on October 23, 2018, 02:56:44 PM
Hi friends,
this is my new collection of distortion guitars using the JazzCombo DSP discussed IN THIS THREAD (https://www.psrtutorial.com/forum/index.php/topic,56799.0.html), that I have configured at my personal taste. This DSP is available also on Tyros 5, SX900 and S970/975. Some voices, however, could not load properly on these arrangers because 60sGuitars are Genos exclusive actually. The pack contains 12 guitars. Enjoy  :)

DOWNLOAD (https://1drv.ms/u/s!Ap_lPbsw3Hw3gS3k8pYsA2pdL52e?e=KDoAN5)

Best regards

Francesco
Title: Re: Metal Guitars for Genos
Post by: deepsae48 on October 23, 2018, 03:03:42 PM
Francesco,
 Thanh you very much for your gift
Title: Re: Metal Guitars for Genos
Post by: rodrigo.b on October 23, 2018, 03:42:30 PM
Hi everyone,
this is my collection of 10 electric guitars good for hard rock and metal. I tried to manage all RealDistortion DSP parameters to get the best sounding result.
This pack MAY work on Tyros5 (and maybe on some PSR S-Series), but not properly, because some voice / DSP won't be available as exclusive of Genos.

Best regards

Francesco


***! thank you! Super Articulation sounds, how do you create this sounds?
Title: Re: Metal Guitars for Genos
Post by: zionip on October 23, 2018, 04:37:38 PM

***! thank you! Super Articulation sounds,how do you create this sounds?

Hi Rogrigo,

This pack comes with 7 .SAR files (correspond to SA/SA2 voice files), 2 .CLV files (non SA voice files), and 1 .VCE file (voice set file).

The above voice files were edits of existing preset voices on Genos.

Jørgen Sørensen's following web page explains how these voice files can be created:
http://www.jososoft.dk/yamaha/articles/voices.htm

Thanks,
Paul
Title: Re: Metal Guitars for Genos
Post by: rattley on October 24, 2018, 12:15:31 AM
Thank You !!    -charley
Title: Re: Metal Guitars for Genos
Post by: Tankdave on October 25, 2018, 11:15:29 PM
I can't quite work out how to get this pack into YEM?
Title: Re: Metal Guitars for Genos
Post by: zionip on October 25, 2018, 11:23:07 PM
I can't quite work out how to get this pack into YEM?

Run Yamaha Expansion Manager 2.5.2.
On the left hand side near the top, click the '+' button of My Packs, select "Import Pack".
Navigate through the popped up Windows Explorer to where you store the "SoundTrack_Genos.ppf" file and select that file to import the pack into YEM.

Thanks,
Paul
Title: Re: Metal Guitars for Genos
Post by: Tankdave on October 25, 2018, 11:33:40 PM
Thanks, I thought the Metal Guitars was a pack too.

I being "thick", its voices not a pack.

Title: Re: Metal Guitars for Genos
Post by: zionip on October 25, 2018, 11:46:12 PM
I mixed up the SoundTrack pack and the Metal Guitar.

The Metal Guitar voices are not in an expansion pack.  When you unzip the zip file, there are a bunch of voice files.

Create a sub folder in your USB stick called "Metal_Guitar" and copy all these voice files there.

Plug the USB stick on to Genos.  Press the R1 voice sub window on the touch screen, then select User, then USB1, then the sub folder "Metal_Guitar" and pick any voice you want to try.

Thanks,
Paul
Title: Re: Metal Guitars for Genos
Post by: Tankdave on October 26, 2018, 02:18:00 PM
I have now made a "Voices" folder on my USB1 drive and put a "Metal Guitars" folder in that.

Thanks to Francesco for the work
Title: Re: Metal Guitars for Genos
Post by: gary3917 on November 20, 2018, 11:06:35 PM
any metal guitars for the Tyros 5 ?
Title: Re: Metal Guitars for Genos
Post by: overover on November 21, 2018, 12:46:23 AM
any metal guitars for the Tyros 5 ?

Hi Gary,

if not done yet, simply try these Metal Guitar voices on your Tyros5:

Unzip the voices, then copy them to a USB stick and use the Voice Selection display (Tab to USB1) on Tyros5 (for example in Right 1 part).

I did NOT try these voices on T5 yet, but XG tone generators usually replace unknown voices/effects automatically with similar ones. Maybe you can do something with these Genos voices on T5 as well. :)


Best regards,
Chris
Title: Re: Metal Guitars for Genos
Post by: Eric, B on November 22, 2018, 07:51:45 PM
Hi everyone,
this is my collection of 10 electric guitars good for hard rock and metal. I tried to manage all RealDistortion DSP parameters to get the best sounding result.
This pack MAY work on Tyros5 (and maybe on some PSR S-Series), but not properly, because some voice / DSP won't be available as exclusive of Genos.

Best regards

Francesco

Hi Francesco,
Thank you so much for your work.
How do you feel about creating a more authentic Santa guitar ala "Smooth" and Pink Floyd guitar ala "Another Brick in the wall"?
I wouldn't mind paying for it ...
Grazie Mille
Eric
Title: Re: Metal Guitars for Genos
Post by: Normanfernandez on November 22, 2018, 07:59:17 PM
Hi Francesco,
Thank you so much for your work.
How do you feel about creating a more authentic Santa guitar ala "Smooth" and Pink Floyd guitar ala "Another Brick in the wall"?
I wouldn't mind paying for it ...
Grazie Mille
Eric
Voice suggestion for another brick in the wall
For PSR S770
Title: Re: Metal Guitars for Genos
Post by: CMS Sounddesign on February 12, 2019, 02:46:21 PM
Hi !

We have in our freeware content a heavy guitar for all Users who are looking for a slightly tougher guitars.

- CMS Heavy Guitar (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20heavygit%20demo.mp3

- CMS Hard Rock (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20hardrock%20audio%20demo.mp3

Regards/Peter
Title: Re: Metal Guitars for Genos
Post by: Bachus on February 12, 2019, 06:12:42 PM
Hi !

We have in our freeware content a heavy guitar for all Users who are looking for a slightly tougher guitars.

- CMS Heavy Guitar (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20heavygit%20demo.mp3

- CMS Hard Rock (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20hardrock%20audio%20demo.mp3

Regards/Peter

Brilliant as allways..
Title: Re: Metal Guitars for Genos
Post by: Eric, B on February 14, 2019, 07:24:22 PM
Hi !

We have in our freeware content a heavy guitar for all Users who are looking for a slightly tougher guitars.

- CMS Heavy Guitar (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20heavygit%20demo.mp3

- CMS Hard Rock (http://www.cms-sounddesign.de/page110.html)
Audio Demo: http://www.cms-sounddesign.de/wa_files/cms%20hardrock%20audio%20demo.mp3

Regards/Peter

Hi Peter,
First of all, Vielen lieben Dank for your freeware.
I downloaded a couple of things and they are awesome.  ;)
As mentioned above I am interested in a nice Fender Strat similar to the one in the PA4x.
Both: Mega voice and SA voice.
I wouldn't mind paying for it as an expansion pack.
What do you think?
Again, vielen Dank
Liebe Gruesse
Eric
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 14, 2019, 08:59:52 PM
Hi everyone,
this is my collection of 10 electric guitars good for hard rock and metal. I tried to manage all RealDistortion DSP parameters to get the best sounding result.
This pack MAY work on Tyros5 (and maybe on some PSR S-Series), but not properly, because some voice / DSP won't be available as exclusive of Genos.

Best regards

Francesco

Oh.......... I missed this guy so much!!!!

Thank you Francesco for your talent AND FOR SHARING!

And Peter!! Missed you too, Thanks Man

Eager to test it out!
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 14, 2019, 09:41:39 PM
Since Peter and  Francesco are here.

Can i please ask you guys to produce or share Reggeaton Styles?

The only people i see did it are these guys

https://samplecreator.it/en/product/pack-reggaeton-1/

It sounds really good but i'm not paying 44Euros for 5 tyles, sorry

I just need One good style that i can twick myself

Any ideas?
Title: Re: Metal Guitars for Genos
Post by: CMS Sounddesign on February 15, 2019, 02:11:18 PM
Hi Peter,
First of all, Vielen lieben Dank for your freeware.
I downloaded a couple of things and they are awesome.  ;)
As mentioned above I am interested in a nice Fender Strat similar to the one in the PA4x.
Both: Mega voice and SA voice.
I wouldn't mind paying for it as an expansion pack.
What do you think?
Again, vielen Dank
Liebe Gruesse
Eric

Hi Eric !

Soundwise, everything is basically feasible, but unfortunately Yamaha does not allow the end customer to own MEGA Voices, S-Art Voices or REVO! To create drums. The YEM has this no editing options. I programmed the heavy guitar according to the concept of Multilayers with Dynamic Zones and Key Zones. A deeper edition is not possible for end customers or third party manufacturers. Only Yamaha has the possibility to edit or produce these sounds. We've already brought this annoying condition to Yamaha several times, but in Japan, you can hear taueb ears.

Greetings from "Old Germany" ! :-)

Peter
Title: Re: Metal Guitars for Genos
Post by: CMS Sounddesign on February 15, 2019, 02:13:20 PM
Since Peter and  Francesco are here.

Can i please ask you guys to produce or share Reggeaton Styles?

The only people i see did it are these guys

https://samplecreator.it/en/product/pack-reggaeton-1/

It sounds really good but i'm not paying 44Euros for 5 tyles, sorry

I just need One good style that i can twick myself

Any ideas?

Hello !

I can not really help with styles. We do not produce styles. The exchange of copyrighted software is also prohibited. The production of software costs time and money. Whether the price appears to be justified, everyone must know himself. Simply copy or exchange is not the correct way. Sooner or later such companies have to stop production and where do you get your software from?

Greetings / Peter
Title: Re: Metal Guitars for Genos
Post by: Styles2psr on February 15, 2019, 04:12:51 PM
Since Peter and  Francesco are here.

Can i please ask you guys to produce or share Reggeaton Styles?

The only people i see did it are these guys

https://samplecreator.it/en/product/pack-reggaeton-1/

It sounds really good but i'm not paying 44Euros for 5 tyles, sorry

I just need One good style that i can twick myself

Any ideas?


What makes you think that only Samplecreator have made Reggaeton styles?
I've made some Reggaeton styles back in 2011-2012, also on EDM Essential 2 and on my latest Expansion Pack Best of EDM & Trance

Here is a couple of videos with my Reggaeton styles
https://www.youtube.com/watch?v=9DGNybJw8Xk  at 2:07 you can hear the Mega Reggaeton style.

https://www.youtube.com/watch?v=aCBiWbRjQfM  at 1:07 you hear Dirty Reggaeton style.

https://www.youtube.com/watch?v=N4v05ZhYzos  Reggaton style based on Becky G "Sin Pijama"


There is a very nice style from EDM Essential 2 Expansion Pack based on Malumas "felices los 4"

Regards, Jan.
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 15, 2019, 04:57:30 PM
Dear Peter, I've attached the link as a reference to the style
I obviously didnt suggest any copying or duplicating anything from any one and I'm sorry if I was misunderstood or maybe I didnt understand what you wrote.
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 15, 2019, 05:00:29 PM

What makes you think that only Samplecreator have made Reggaeton styles?
I've made some Reggaeton styles back in 2011-2012, also on EDM Essential 2 and on my latest Expansion Pack Best of EDM & Trance

Here is a couple of videos with my Reggaeton styles
https://www.youtube.com/watch?v=9DGNybJw8Xk  at 2:07 you can hear the Mega Reggaeton style.

https://www.youtube.com/watch?v=aCBiWbRjQfM  at 1:07 you hear Dirty Reggaeton style.

https://www.youtube.com/watch?v=N4v05ZhYzos  Reggaton style based on Becky G "Sin Pijama"


There is a very nice style from EDM Essential 2 Expansion Pack based on Malumas "felices los 4"

Regards, Jan.

Jan, its sounds fantastic!

Let me ask you this because I'm a bit confused:

If I buy essential 2 it means I dont need essential 1 correct?
What about "The Best of" ? Is this totally different pack?

I'm just trying to prevent buying duplicated styles

Elad
Title: Re: Metal Guitars for Genos
Post by: Styles2psr on February 15, 2019, 05:53:06 PM
Jan, its sounds fantastic!

Let me ask you this because I'm a bit confused:

If I buy essential 2 it means I dont need essential 1 correct?
What about "The Best of" ? Is this totally different pack?

I'm just trying to prevent buying duplicated styles

Elad


You can start to download my previous Dance/Trance style collections including the 2 first Reggaeton styles for free here:
https://psrtutorial.com/sty/collections/jan.html


EDM Essential 2 has only 1 Reggaeton style (Maluma "felices los 4"), but altogether 78 different styles.
It contains 39 brand new styles + all styles from EDM Essential 1,
Ultimate EDM, and 6 styles from Trance Master, so you don't need EDM Essential 1.

The styles covers the most popular EDM genres like Brazilian Bass (G-House), Euro Dance,
Future Bass, Future Pop, Italo Disco, Nu Disco, Progressive House, Trance, and Tropical House.


Regards, Jan.
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 15, 2019, 06:17:39 PM
The Best of EDM and TRANCE
Is completely different than the essential 2 ?
Title: Re: Metal Guitars for Genos
Post by: CMS Sounddesign on February 15, 2019, 08:45:00 PM
Dear Peter, I've attached the link as a reference to the style
I obviously didnt suggest any copying or duplicating anything from any one and I'm sorry if I was misunderstood or maybe I didnt understand what you wrote.

Hi Elad !

I understand this as if it's a call to copy the software. Sorry, if I got it wrong. I just wanted to make it clear that I'm acting on software according to the principle of "fair play".

Regards/Peter
Title: Re: Metal Guitars for Genos
Post by: elad770 on February 15, 2019, 09:06:44 PM
Let me tell you something because it's VERY relevant to what you just said:

About a month ago I asked Jan for a discount on his product. I wanted to buy 2 packs for a discounted price because 58$ is a lot for me EVEN if I was fully aware of the value and the invested time in making the packs. He refused and I think he doesn't like me since then  ;)

A few days later, A member who read the post with my messages to Jan reached out to me privately and offered me to trade style2psr packs

It was very tempting. He has Essentials 2 And willing to trade if I will get The best of EDM Trance pack. - That is 50% Less from what I would have paid. Again, Very tempting!

I told the guy: Look, Despite the fact that I disagree with Jan and I think a discount should be warranted, I can NOT ignore the fact that his creation is dear to him and he invested in it a lot. I have to respect it and refused his offer!

Literally 10min ago I've purchased both packs and without playing yet I know they are good.

I might be reserved when it comes to spending money on styles. (Especially when some companies are absolutely ridiculous with the price)
But I'm an honest guy and will never hurt someone's business or copy his creation

I also think Jan is an exception to the rule altogether because he's contributing to the community and ALREADY shared many many exceptional styles with everyone. (See the above links he posted)

So, I'm only trying to strengthen what you said and to wish you the best of luck.
Title: Re: Metal Guitars for Genos
Post by: Eric, B on February 16, 2019, 04:27:25 AM
Hi Eric !

Soundwise, everything is basically feasible, but unfortunately Yamaha does not allow the end customer to own MEGA Voices, S-Art Voices or REVO! To create drums. The YEM has this no editing options. I programmed the heavy guitar according to the concept of Multilayers with Dynamic Zones and Key Zones. A deeper edition is not possible for end customers or third party manufacturers. Only Yamaha has the possibility to edit or produce these sounds. We've already brought this annoying condition to Yamaha several times, but in Japan, you can hear taueb ears.

Greetings from "Old Germany" ! :-)

Peter

Hi Peter,
Thanks for your reply and explanation.
I appreciate it. ;)
Liebe Gruesse nach Deutschland
Eric
Title: Re: Metal Guitars for Genos
Post by: Bachus on February 16, 2019, 02:32:23 PM
Hi Eric !

Soundwise, everything is basically feasible, but unfortunately Yamaha does not allow the end customer to own MEGA Voices, S-Art Voices or REVO! To create drums. The YEM has this no editing options. I programmed the heavy guitar according to the concept of Multilayers with Dynamic Zones and Key Zones. A deeper edition is not possible for end customers or third party manufacturers. Only Yamaha has the possibility to edit or produce these sounds. We've already brought this annoying condition to Yamaha several times, but in Japan, you can hear taueb ears.

Greetings from "Old Germany" ! :-)

Peter

I still wonder if its the Japanese team failing to listen.... or the european/geman development and marketing team putting enough pressure on the japanese team..

It shouldn’t be that hard for them to implement the edditing system of the modx into the Genos..  making yem as it was supposed to be a package management system...
Title: Re: Metal Guitars for Genos
Post by: Styles2psr on February 16, 2019, 07:50:53 PM
You guys still don't understand?
Once Yamaha give us the tools, they will loose most of their software customers  ;)
This is one of the reasons why YEM are a construction from the Stone age.

Regards, Jan.
Title: Re: Metal Guitars for Genos
Post by: CMS Sounddesign on February 16, 2019, 08:14:27 PM
Hi !

Yamaha is wrong. The "average user" will hardly be able to use the extended functions, since most of the know-how is missing. He will continue to buy Yamaha software.
The "power user" usually does not buy software from Yamaha anyway, since he does almost everything himself.

It is therefore a misconception of Yamaha that further functions would disturb the sales of the software. If Yamaha offered a YEM "Pro" for a fee, it would be an incentive for people to buy the instruments, as they would finally have a full and up-to-date sampler at hand.

As always ... Japanese narrow-mindedness. If Yamaha goes on like this, then comes the day where more and more "power users" jump off and turn to other options. Once the customers are gone, it will be difficult to get them back.

Greeting / Peter
Title: Re: Metal Guitars for Genos
Post by: pjd on February 16, 2019, 09:31:10 PM
Hi --

Peter, we share your pain. There are several people on the Forum who develop their own voices using YEM.

I was told (by a Steinberg rep) that new feature requests from individual users are not likely to be implemented. If many users request a feature, it is more likely to be implemented. Yep, Steinberg is not all of Yamaha, but this is a common principle in software marketing and development.

I wish there was a way for all of us who need YEM enhancements to take our collective case to Yamaha. Like others, I've made a personal plea to Yamaha reps, Yamaha support, etc. There doesn't seem to be a way to communicate with Yamaha YEM managers/developers directly like the Yamaha IdeaScale forum for synths. On that forum, members can vote for new product ideas and it's easy to see which ideas are the most popular, needed and wanted.

Unfortunately, comments like ours -- buried in a thread titled "Metal guitars for Genos" -- are unlikely to be heard.

All the best -- pj
Title: Re: Metal Guitars for Genos
Post by: soundphase on February 17, 2019, 10:15:12 AM
On that forum, members can vote for new product ideas and it's easy to see which ideas are the most
A good proposition for this forum ?

I would vote 10000 x YES for Seamless sound switch

Soundphase
Title: Re: Metal Guitars for Genos
Post by: Bachus on February 17, 2019, 11:56:44 AM
You guys still don't understand?
Once Yamaha give us the tools, they will loose most of their software customers  ;)
This is one of the reasons why YEM are a construction from the Stone age.

Regards, Jan.

This is the way Yamaha seems to be thinking..

Hi !

Yamaha is wrong. The "average user" will hardly be able to use the extended functions, since most of the know-how is missing. He will continue to buy Yamaha software.
The "power user" usually does not buy software from Yamaha anyway, since he does almost everything himself.

It is therefore a misconception of Yamaha that further functions would disturb the sales of the software. If Yamaha offered a YEM "Pro" for a fee, it would be an incentive for people to buy the instruments, as they would finally have a full and up-to-date sampler at hand.

As always ... Japanese narrow-mindedness. If Yamaha goes on like this, then comes the day where more and more "power users" jump off and turn to other options. Once the customers are gone, it will be difficult to get them back.

Greeting / Peter

But i tend to agree with Peter..

Except for the fact that in my book the narrowmindnessness comes from the European arranger team more then the Japanese team.... when you look how the US based synth team has developed over the last decade, it proves that Yamaha in Japan must be listening to them..   because there is just a single Japanese develoment team working mostly based on the input of the worldwide marketing teams..

I doubt its Yamaha Japan...
Because the difference in everything between the US team and the EU marketing team is shocking..

If they open up the system, the only one that will really benefit is Yamaha..in the long road..and offcourse all the customers..
Title: Re: Metal Guitars for Genos v2.0
Post by: lilryu on January 01, 2024, 10:42:57 PM
The link isn't working anymore. Can someone help re-upload this? Thank you.
Title: Re: Metal Guitars for Genos v2.0
Post by: Michael Trigoboff on January 02, 2024, 01:18:44 AM
Yep, download not working. Hoping someone will make it available.