PSR Tutorial Forum

PSR Keyboards (11 Boards) => PSR-S950/S750/S650 (SFF2) => Topic started by: Dick Rector on June 21, 2018, 02:35:26 AM

Title: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 02:35:26 AM
I used programs from Michael en Jorgen to bring 1 voice in a style to a maximum (127) but it is still to low. How do I bring this voice to a higher level? Anyone?
I thought I did that before but totally forgotten how.

Thanks in advance,

Dick
Title: Re: Volume of one voice to low
Post by: DrakeM on June 21, 2018, 03:22:16 AM
Hi Dick,

The voice you want raised, is it in the OTS settings or one of the voices in the style's Main Parts?
Title: Re: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 04:13:37 AM
Hi Dick,

The voice you want raised, is it in the OTS settings or one of the voices in the style's Main Parts?

It is in the main part of a (custom) style. Bringing the volume up to 127 on the keyboard and in other programs just isn't enough. If it was in OTS I could do it but not in the style itself.
Thanks for replying Drake!
 
Title: Re: Volume of one voice to low
Post by: DrakeM on June 21, 2018, 04:57:06 AM
Well post the style and tell if it is the bass, Pad, Phr1 or2 or which one needs fixed.

Not sure what the problem is or if i can fix it .. but I'll take a look at it.
Title: Re: Volume of one voice to low
Post by: pieterpan on June 21, 2018, 06:08:06 AM
Dick,

Volume has 2 components - 1 is the volume and 2 is the expression, the last has to set on value 127. Did you check this?

Regards <> Piet
Title: Re: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 07:49:03 AM
Well post the style and tell if it is the bass, Pad, Phr1 or2 or which one needs fixed.

Not sure what the problem is or if i can fix it .. but I'll take a look at it.

Thanks for your kind offer Drake but I found another a bit louder voice and replaced it. It is the solo-trumpet in PHR2 in the style 'Il Silenzio'.

Regards
Dick
Title: Re: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 07:51:32 AM
Dick,

Volume has 2 components - 1 is the volume and 2 is the expression, the last has to set on value 127. Did you check this?

Regards <> Piet

Piet, thanks for the reply but where do I find 'expression' on the PSR S950? Problem is solved anyway but I would like to know.

Groetjes
Dick
Title: Re: Volume of one voice to low
Post by: pieterpan on June 21, 2018, 08:58:39 AM
Dick,

Don't think you can find it on your KB but MixMaster can.

See attached picture.

Regards <> Piet
Title: Re: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 09:48:48 AM
Dick,

Don't think you can find it on your KB but MixMaster can.

See attached picture.

Regards <> Piet


Ohhhh thanks for the reply again Piet, I was looking at the keyboard settings.
Senior moment...... :D
Title: Re: Volume of one voice to low
Post by: DerekA on June 21, 2018, 12:40:18 PM
How about turn all the other style parts down a bit, then increase the master volume? (All the way up to 11 if you need to)
Title: Re: Volume of one voice to low
Post by: Joe H on June 21, 2018, 02:48:33 PM
Dick,

I've remixed many styles to date and I find that if the volume is too low or too high on one style part only but fine on the other parts, I use StyleMagic to adjust the note velocity.  It could be that the part you are talking about was recorded with a certain Voice and if it was changed to a different Voice... that could be the problem.

Joe H
Title: Re: Volume of one voice to low
Post by: Dick Rector on June 21, 2018, 11:13:16 PM
Dick,

I've remixed many styles to date and I find that if the volume is too low or too high on one style part only but fine on the other parts, I use StyleMagic to adjust the note velocity.  It could be that the part you are talking about was recorded with a certain Voice and if it was changed to a different Voice... that could be the problem.

Joe H

Thanks Joe, the problem is solved but I will keep that in mind as I have Stylemagic. Just never thought of it.......

Regards
Dick