PSR Tutorial Forum
PSR Keyboards (11 Boards) => PSR-S970/S770/S670 (SFF2) => Topic started by: Dermot J on April 12, 2018, 04:02:10 AM
-
Hi, I'd like to practice without disturbing the rest of the house but I notice my headphones don't mute the speakers on my PSR 770. Any help would be appreciated?...
Dermot J.
-
Hi Dermot,
did you use a Headphone Adapter Plug with your headphones like this one?
https://www.amazon.com/RCA-AH216-Stereo-Headphone-Adapter/dp/B00005T3GH (https://www.amazon.com/RCA-AH216-Stereo-Headphone-Adapter/dp/B00005T3GH)
Also connect the headphones to the left side of your keyboard under the pitch bend wheel (where it says phones) and not in front of the keyboard.
-
Hi Panos,
Thank you.
Yes I'm using an adapter like that one?...
-
That is strange.Seems that your keyboard doesn't connect with the adapter properly to mute the speakers.
And you can hear no sound at all through your headphones right?
And you connected the adapter to your left hand where the "phones" sign is right?
If you just put the adapter there without headphones,the speakers must not make any sound also.
-
It gets more strange! I CAN hear sound through the headphones. Putting the adapter there without the phones still allows sound through the speakers. I may need to try a different adapter?
-
Hi Dermot J,
Unlike earlier PSR models, the S970/770 has a function similar to that on Tyros models which controls what happens when you plug headphones into the keyboard.
Press Function > Utility (in Menu 1) > Config2.
Select Option 1 - Speaker. This is the setting that controls the behaviour of the on board speakers.
At the bottom of the display you will see a list of possible settings for this.
The options are:
HEADPHONE SW: Speaker sounds normally, but is cut off when headphones are connected to the [PHONES] jack.
ON: Speaker sound is always on, even if headphones are connected.
OFF: Speaker sound is off. You can only hear the instrument sound via the headphones or an external device connected to the AUX OUT jacks.
For auto switching of the speakers when you plug in headphones you need to set this to HEADPHONE SW.
This is a system setting, so once you set it, it should stay as set until you change it, or carry out a system reset after which it will revert to the default setting (I don't know what this is on an S970/770, but I would have thought that it would be SPEAKER SW)!
Regards
Ian
-
Ian found the problem :)
Nice function this one.I wonder what equalizer settings to choose when you use it.
Settings for the player, or settings for the audience ;D
-
Thank you Ian. This has indeed solved the issue. Now I can wreck my head instead of everybody else's!!!... ::)
-
Ian found the problem :)
Nice function this one.I wonder what equalizer settings to choose when you use it.
Settings for the player, or settings for the audience ;D
You can create a one User Master EQ just for your headphones and another for speakers.
Joe H