PSR Tutorial Forum
PSR Keyboards (11 Boards) => PSR-S970/S770/S670 (SFF2) => Topic started by: MarcusAhlback on January 14, 2018, 09:46:48 PM
-
Hi,
I'm would like to customize the MIDI receive settings of my PSR-S770, but I fail.
I use the PSR-S770 as a backing keyboard to my stage piano and basically that works fine.
However what I would like is the PSR-S770 to ONLY receive MIDI data to the accompagniment/style.
The reason for that is that I in general play a piano sound and piano type of playing on the piano and it doesn't sound good if that notes are copied by for exampel guitars, flutes or whatever kind of instruments I have on the PSR.
Would that be possible to do?
Best regards Marcus
-
You might try turning Local Off for R1, R2 and Left Voice. These are channels 1, 3, and 2 respectively. Also see my Transmit and Receive setups.
Joe H
[attachment deleted by admin]
-
Thanks a lot for your reply, I truly appreciate it.
And apologies for my late response. I haven't been able to test it until now.
However I'm afraid your solution is the opposite of what I wan't to do.
If I turn Local off for R1 R2 and left that means that these parts will react ONLY to my external stage piano bot not to the PSR-S keys.
I wan't the opposite, to have R1 R2 and left to ONLY react to the PSR-S keys and to disregard the external stage piano.
Best regards Marcus
-
Sorry if I misunderstood what you are trying to do. This setup is for using the arranger to play an external sound module for R1 along with the styles.
Joe H
-
No worries Joe.
I figured that there might be a misunderstanding.
Best regards Marcus