PSR Tutorial Forum

Genos (12 Boards) => Genos - General => Topic started by: JohnH on January 04, 2018, 05:07:53 PM

Title: SAVE SETTING
Post by: JohnH on January 04, 2018, 05:07:53 PM
GENOS OWNERS------I went to -MENU 2---keyboard/joystick setting----I changed my touch curve------HOW do i keep it there--because when i turn the keyboard off it goes back to the normal-setting---THANKS !!------------JohnH
Title: Re: SAVE SETTING
Post by: zionip on January 04, 2018, 05:31:34 PM
What you claimed is not what I found on my Genos. 

The default setting on Genos:
  Initial touch curve:  Normal
  After touch curve:   Medium

I changed to:
  Initial touch curve:   Easy1
  After touch curve:    Soft

Then I powered Genos off, waited for a few minutes, then powered Genos on, the following setting remained unchanged:
  Initial touch curve:   Easy1
  After touch curve:    Soft

My Genos is running at firmware 1.10.

Thanks,
Paul
Title: Re: SAVE SETTING
Post by: JohnH on January 04, 2018, 06:22:32 PM
THANKS PAUL-----You are a great help to this forum-----I appreciate your detailed, quick, accurate responses----I did what you described--it worked OK for me-----don't know why--but it's good now------THANKS !!-----------------JohnH