PSR Tutorial Forum

Genos (12 Boards) => Genos - General => Topic started by: chony on November 24, 2019, 07:51:19 PM

Title: YEM Genos issues
Post by: chony on November 24, 2019, 07:51:19 PM

I loaded up my Genos with 2.5gb using YEM, but now when I come back to YEM there's this ugly black thingy taking up all my RAM space. (See pic). I cannot get rid of it even after unselecting all packs, restarting the program, etc.

What is it and how do I get my YEM back so that I can create new Genos files.



[attachment deleted by admin]

Title: Re: YEM Genos issues
Post by: ugawoga on November 24, 2019, 08:02:50 PM

Hi
That is how much memory you have used is that black thingy.
Still in RAM. even after untick.
I bet if you deleted packs the black thingy would go down according to how much memory has been used

Title: Re: YEM Genos issues
Post by: bryan01 on November 24, 2019, 08:44:16 PM

Hi Chony,
surely the clue is in your first line, you loaded 2.5 Gb into your Genos. So you will have a representation of your Memory size showing used space and free space. This indicates that you have about 0.5 Gb to use up with your future files.
If you deselect your packs and "send to instrument" your genos will format the drive and only the ones that you selected will be on there + smaller bar. It takes about twenty minutes.
If you need to save space - only load the packs that you use regularly.
Good luck
Bryan

Title: Re: YEM Genos issues
Post by: EileenL on November 24, 2019, 10:37:23 PM

Yes the black line indicates how much space is taken by your packs. It was Green before but dose the same job. If you have other packs to load in do it the normal way.

Title: Re: YEM Genos issues
Post by: terryB on November 25, 2019, 07:32:11 AM

Hi Chony
You can also get  rid of all those audio styles to save space by sending them one by one to a user file and then deleting them from the expansion pack. To do this you click on each audio style file in the expansion files, and do 'save as' to the user area folder you have set up.
After this as far as YEM is concerned they are history and the user files set up for the audio styles will become the same as any other style file.
Cheers
Terry

Title: Re: YEM Genos issues
Post by: chony on November 25, 2019, 08:34:58 AM

Thank you for your replies,

But what if I want to make a new selection of packs for my Genos? How do I get rid of the black line and start a fresh selection?

Title: Re: YEM Genos issues
Post by: reya on November 25, 2019, 08:53:03 AM

Chony,

If I may ask, where did you buy that Ketron SX1 expansion pack ?

Thanks,

Best regards
Rudy

Title: Re: YEM Genos issues
Post by: EileenL on November 25, 2019, 11:43:03 AM

To Get the black line back to the start take all the ticks from the boxes. Now tick the boxes of the fresh
Pack you want to make and save to USB. Everything works the same as it did before except you can now do a CQI if wanting to only load a new pack without formatting the memory.

Title: Re: YEM Genos issues
Post by: DerekA on November 25, 2019, 11:50:11 AM

Look for any packs which have green circles (light green means all content is included, dark green means some content). Click on the circles to make them grey, which means not selected. It takes a few seconds after clicking for YEM to recalculate the space.

I have found this a little buggy, I tried to remove everything too and some of them just would not go away. I had to restart YEM a few times, and some of the ones I'd removed came back again. So just keep trying :)