PSR Tutorial Forum
Genos (12 Boards) => Genos - General => Topic started by: sugarplumsss on February 28, 2018, 06:54:17 AM
-
I am having difficulty posting!!
Just trying a different section to see if it is any better here!
-
While I was able to post here... when I tried to add a second post,,, I received the same message about... error no subject
-
What board did you receive the error message in before, John?
-
maybe that one
https://www.psrtutorial.com/forum/index.php/topic,43358.msg342555.html#msg342555 (https://www.psrtutorial.com/forum/index.php/topic,43358.msg342555.html#msg342555)
-
John's comment posted in that topic, Panos. I'm working on the issue. :)
-
What board did you receive the error message in before, John?
Error message on the T4 board. Maybe even the Genos boards, but I cannot recall.. but definitely hit and miss ( mostly miss ) on the T4 board.
Thank you for addressing this.
OT I spoke to Yamaha tech support today, and I gleaned that the new Genos is quite a bit more complicated than the Tyros line!!
-
Thank you for letting me know, John. I was following your posts on the T4 board.
-
This message appear when try post at Genos forum:
The following error or errors occurred while posting this message:
The message body was left empty.
If this post show here now, it works in this part now, but did not earlier today.
Same message in several forum I tested.
-
This message appear when try post at Genos forum:
The following error or errors occurred while posting this message:
The message body was left empty.
If this post show here now, it works in this part now, but did not earlier today.
Same message in several forum I tested.
It happened to me yesterday, when I was intended to post a code in page... (THIS (https://www.psrtutorial.com/forum/index.php/topic,43351.msg342468.html#msg342468) post)
After I wrote that code from picture in my PC and after I've replaced code with picture, I could post!
Regards,
Vali
-
It happens now ... pffff
(http://i64.tinypic.com/2cfdx95.jpg)
-
I get the same message even with text in message field. Very strange.
If this message post, then the 'fault' is not static/permanent, but variable.
-
Seems like a problem we encounter in different boards. :(
Just a suggestion untill the problem can be fixed in case you are going to post a text with many lines in it.
Before you click on "post" better save your text first,so you don't have to write it again.
e.g for mozilla which I am using: right click, select( or highlight) all and copy.
I had to re-write a post 3 times yesterday and it was something with many lines.
-
Seems like a problem we encounter in different boards. :(
Just a suggestion untill the problem can be fixed in case you are going to post a text with many lines in it.
Before you click on "post" better save your text first,so you don't have to write it again.
e.g for mozilla which I am using: right click, select( or highlight) all and copy.
I had to re-write a post 3 times yesterday and it was something with many lines.
If you press Back on your browser, even if you get a "confirmation error" page, press again Back and you'll have your posting board again, with text inside! ;) (Almost of me it's working)
Regards,
Vali
-
Please be patient, everyone. We're aware of this issue and as stated in another thread, we are actively pursuing a resolution to this problem. :)
-
Hello :) This is off topic, but could we get the spell check back please? The box opens, but there is no word library in there. :)
-
We're working on that issue too, Toril. :)
-
Rog, I went through some similar problems today. Additionally, I got a security warning when I tried to attach a photo. Weird!
Gary 8)
-
I saw all of the messages that were generated in the Forum Error Log for you, Gary. I'm trying to resolve this issue. :(
-
I saw that also it changed the pagecode , as my diacritical from signature is changed to some strange characters ... Even if I edit signature and replace those characters with diacritic, after saving, will replace again with those characters!
Regards,
Vali
-
And that happens here also. If I try to write a smily, some strange character comes out.
-
Test .... if start with special letters like " the erros message appears and not possible to post. So quote is also a problem.
-
The problem is intermittent and not constant, so it's rather difficult to resolve this type of an issue. We're actively pursuing this problem. :) :) :)
-
I'm having the same problem. Seems related to the length of the message.