Trying to understand this... Ever since I had my Genos my assigned settings never changed...until now. So What you are saying is I have a registration that is changing my assignables back to default?
Hi Ken,
When you
close the Assignable display after changing settings (by pressing the EXIT button or touching the X icon), the current settings are
automatically saved in System Setup. However, by calling up Registrations in which
different settings are memorized, the Assignable Buttons settings can be changed again at any time. So you most likely have one or more such registrations.
The same applies to the Pedal and Live Control settings. Therefore, when creating/changing Registrations, make sure that the "Live Control", "Foot Pedals" and "Assignable Buttons" are NOT ticked in the memory dialog if you do not want these settings to be memorized in the Registrations.
In order to be able to quickly return to your preferred Assignable settings, it is advisable to create one or more so-called "Setup Registrations" that can be used to reset the settings in question.
By the way, to temporarily ensure that certain settings cannot be changed by Registrations, you can use the FREEZE function:
- Make sure the FREEZE button is off
- Press "Direct Access > Freeze" to bring up the Freeze Settings.
- Make sure that only the desired checkmarks are set there (e.g. "Assignable Buttons") and close the Freeze display again to save the current settings.
- If FREEZE is switched on later (LED lights up), the desired settings are protected from changes by Registrations (in the current session).
Best regards,
Chris