Hi Klaus,
In the first Genos firmware versions, prior to V1.20, if I remember correctly, there were problems with the "Keyboard Volume" function. This was not compatible with the function of the same name on the Tyros5 (there to be operated via the "Assignable Slider" or via the Balance display).
If I'm not mistaken, it was originally the case that when changing the "Keyboard Volume" parameter, the current volume ratio of the keyboard parts was not retained correctly, but all keyboard parts were incorrectly set to the same volume value.
With version 1.20 the Live Control Slider "Type 1" was assigned with "KbdVol" by default and this function now works as usual from the Tyros5:
Version History (Genos)
[V1.10 to V1.20]
- ...
- A new LIVE CONTROL assignable parameter is available: "Keyboard Volume."
- The default settings of LIVE CONTROL slider assign type 1 are changed: the "Keyboard Volume" is assigned to slider 9.
- ...
By the way: I only work with the "Keyboard Volume" when I don't have a volume pedal connected. Usually I have connected an FC7 pedal that only affects the RIGHT parts.
Obviously the parameter "Keyboard Volume" was forgotten in the current Genos Data List (section "Parameter Chart"). As far as I know, just like with the Tyros5, this is saved in Registrations with the checkbox "VOICE". I do NOT recommend storing a reduced "Keyboard Volume" in Registrations. I always make sure that "Keyboard Volume" is set to 127 when saving Registrations. So I always set the volume of the keyboard parts in the "normal" way.
Best regards,
Chris