Firmware Installation ProcedureNotice: Do not turn off the power of the instrument or remove the USB flash drive during this operation.
1) Download the firmware
a) Download the Zip file to the computer.
b) Connect the USB flash drive to your computer.
c) Extract the *.prg file and copy it to the root directory of your USB flash drive.
2) Connect the USB flash drive to the instrument
Connect the USB flash drive containing the downloaded files to the USB TO DEVICE terminal of the instrument.
Notice: Make sure that the USB flash drive is properly connected to the terminal. Excessive force or incorrect insertion may damage the terminal.
3) Install the firmware
a) While holding down the STYLE CONTROL [START/STOP] button on the panel, turn the power on.
b) Follow the message appears on the screen.
c) When firmware installation is complete, press the power button on the instrument to turn it off.
When power on again, your Genos is ready to go with the new update.