Hi,
If you have Bose T1 and Yamaha Powered speakers I think you can connect as follows:
- T1 need to have separate power supply if you do not have specific Bose L1 model
- connect all your mics to T1
- connect L+R out put from keyboard to T1 5/6 (please note T1 has one mono balanced output , so whatever you connect to stereo will be summed and come out from main out as mono)
- connect main out put from T1 to Yamaha powered speaker one line input
- take a through signal out from that speaker and connect to other speaker
- apply all dynamics, EQ to each channel as you wish
Note: above will be mono as T1 main out put is not stereo (the new model T1S presently come with stereo output)
however still you can use T1 as a stereo as following:
-connect keyboard L+R out put to two mic. channels(1,2,3,or 4)
-connect main out put to one speaker
- edit T1 settings now (mic. line input to take line inputs)
- edit T1 settings and root one of the mic. inputs to Aux. (1 or 2)
- connect the Aux. 1 or 2 output to other speaker
- apply all dynamics, EQ to each channel as you wish
- save that settings so you will do above only one time
T1 tone match is very powerful and clean digital mixer. I wish Bose include feedback destroyer facility in that in future models
Hope above will work for you.
Thanks
mark
-