Author Topic: Question regarding sliders  (Read 325 times)

0 Members and 1 Guest are viewing this topic.

Offline stephenm52

Question regarding sliders
« on: January 27, 2018, 06:03:56 AM »
Not sure if this question has been asked or posted before.  Itís about the sliders, most of the time when I hit the slider assign button, I have the choices to make adjustments.  I find that from time to time, I canít explain but when I choose #1 ( the options are B, 1 and 2) selection 1 does not take me to where I can adjust the Rhythm1, Rhythm2, Bass.......etc.   Instead it gives me the same choices I get for selection 2 which are volume adjustments for Channels 1 thru 10.   Iím assuming itís a registration I load that changes selection 2, but I canít seem to get it back to the Rhythm1, 2, Bass choices unless I load a registration that was set to the default. Any ideas of where to change this?  Iíve looked in the manuals but did not find an answer there. 
« Last Edit: January 27, 2018, 08:12:35 AM by stephenm52 »
GENOS, Clavinova CVP 307, PSR s970, Korg Pa4x-76

Steve's Genos Recordings

Steve's Gig Disks
 

Offline valimaties

Re: Question regarding sliders
« Reply #1 on: January 28, 2018, 08:33:44 AM »
Not sure if this question has been asked or posted before.  Itís about the sliders, most of the time when I hit the slider assign button, I have the choices to make adjustments.  I find that from time to time, I canít explain but when I choose #1 ( the options are B, 1 and 2) selection 1 does not take me to where I can adjust the Rhythm1, Rhythm2, Bass.......etc.   Instead it gives me the same choices I get for selection 2 which are volume adjustments for Channels 1 thru 10.   Iím assuming itís a registration I load that changes selection 2, but I canít seem to get it back to the Rhythm1, 2, Bass choices unless I load a registration that was set to the default. Any ideas of where to change this?  Iíve looked in the manuals but did not find an answer there.

First Assign button is for Knobs, second Assign is for sliders. The "B" is for Balance and cannot be edited as it said in Reference Manual pg. 129 Green Note!!!
You are pretty sure when you press assign button of knobs it shows that screen of second assign button? If so, it is another bug and might be useful a video with this issue sent to Yamaha.. You can post even here the video, we don't mind  ;)
______________________________________________
All the best,

Vali Matieş - Genos
 

Offline stephenm52

Re: Question regarding sliders
« Reply #2 on: January 28, 2018, 11:07:25 AM »
Vali,   IF I can recreate the issue, Iíll gladly post a video but so far I havenít seen the problem happen again.
GENOS, Clavinova CVP 307, PSR s970, Korg Pa4x-76

Steve's Genos Recordings

Steve's Gig Disks
 

Offline stephenm52

Re: Question regarding sliders
« Reply #3 on: January 28, 2018, 06:44:42 PM »
I have not been able to recreate the problem again.  In the meantime John ďJwyvernĒ wrote the following to me at another Yamaha forum.  Itís a great solution and I didnít know this could be done.

Stephen,
If you want to reset your keyboard quickly to the state that you want it (as opposed to all the "wrong" default settings you get when you do a normal reset) you can save a system file by going to the Utility/Factory Reset menu and touch 2/2. With the keyboard configured as you want it push Save alongside System. Touch User and Save Here.
Now you have this file you can reset Genos anytime quickly to your preferred settings (there are an awful lot of them now compared with Tyros) and without powering off. Just go to the file via the menu and touch load etc. (Remember it will be on User).
John
« Last Edit: January 28, 2018, 06:46:16 PM by stephenm52 »
GENOS, Clavinova CVP 307, PSR s970, Korg Pa4x-76

Steve's Genos Recordings

Steve's Gig Disks
 

Offline stephenm52

Re: Question regarding sliders
« Reply #4 on: February 02, 2018, 01:04:40 PM »
Follow up to my original question.  This is not a bug itís a function of registrations I discovered thru a Peter Baartmans video that the functions of the sliders and knobs can be saved as registrations.  Apparently I used a registration that changed the function of the sliders.
GENOS, Clavinova CVP 307, PSR s970, Korg Pa4x-76

Steve's Genos Recordings

Steve's Gig Disks