Author Topic: Style Recording- Drum sounds are dry  (Read 1740 times)

0 Members and 1 Guest are viewing this topic.

Offline gkthomas

Style Recording- Drum sounds are dry
« on: January 09, 2013, 03:13:08 PM »
I am making some styles using the Indian Kit.  The Drum sound comes out very dry, How can I improve the  drum sounds?  Also I tried real time recording drum patterns with quantizing for 8th note. it
seems like qualtizning is not working at all.  
Any help/Suggestions appreicated
Thanks
George
 

Offline Ed B

Re: Style Recording- Drum sounds are dry
« Reply #1 on: January 09, 2013, 06:35:03 PM »
Hi George
1.Load your style you want to change .
2. Open the mixing console
3. Tab over to "effect"s and you will see reverb. Push button C to select reverb
4. Adjust the reverb button rhythm2  to get the sound you want.
5. Play the style to make sure your satisfied with the change. ( Note this affects all parts using drums)
5. Open style creator, go to assembly page and save.
6. Save to a new name so you still have the original.
I believe this should do what you want if you want a wet sound.

Regards
Ed B
« Last Edit: January 09, 2013, 06:40:45 PM by Ed B »
Keep on learning
 

Offline gkthomas

Re: Style Recording- Drum sounds are dry
« Reply #2 on: April 07, 2017, 07:54:40 AM »
How do I get the section 4
4. Adjust the reverb button rhythm2  to get the sound you want.  I dont get this part,
Thanks
George
 

Online tyrosaurus

Re: Style Recording- Drum sounds are dry
« Reply #3 on: April 07, 2017, 11:43:16 AM »
Hi George,

If you are having problems with Ed B's instructions, then I suspect that you have the wrong page of the Mixing Console open!

Each time that you press the 'MIXING CONSOLE' button, the display toggles through 4 different pages then repeats (Panel Part > Style Part > Song Ch 1-8 > Song Ch 9-16), so press it repeatedly until the correct page is displayed. To adjust the style parts individually, the correct page is the one headed 'MIXING CONSOLE (STYLE PART)'.

You should now see all 8 style parts listed across the bottom of the screen.

Use the Tab buttons to move to the 'EFFECT' tab, then highlight the 'REVERB' row using button 'C' or 'H'.  The row header should light up when selected, indicating than any adjustments that you make will be to this row.

Now use  the relevant 1-8 button pairs to adjust the Reverb level for a part.  In this case for the 'RHY2' part, use the #2 buttons.


Regards

Ian
« Last Edit: April 07, 2017, 11:47:29 AM by tyrosaurus »
 

Offline gkthomas

Re: Style Recording- Drum sounds are dry
« Reply #4 on: April 08, 2017, 04:46:02 PM »
Ian
    Thank you so much. it worked for me.  You are awesome.......
George