hi , this has maybe been discussed before but i,m looking for some help , i have thousands of midi files and as a beginner i use the Guide Function (follow lights / bouncing ball) to play the right hand melody line , i believe the PSR-SX700 is set up to use the "AUTO" channel to do this which is fine but not all midi files have the correct channel set up for this , if the lead melody channel is on say channel 16 or channel 5 or channel 1 etc. how can i change it so that i can still use the Guide Function (Follow Lights / bouncing ball) on a different channel from which the keyboard is set up for , i know if it,s on AUTO channel and the midi file melody channel matches this i just switch off right hand part and press GUIDE button , i know i can also press "settings" button at the extreme right on bottom of display and isolate and change it to the channel that the melody part is on but when you do this yes it then shows this up on the main score page but the GUIDE Function then does not work , the bouncing ball goes across the screen but does not stop waiting for me to play the corresponding note etc. , years ago i had a Tyros 2 and it was easy to change the channel the melody was on and have it work properly on the channel i picked (selected GUIDE right hand part , switch off left hand part) but i can,t work out how to do this on the PSR-SX700 , hopefully someone can steer me in the right direction and find a way to do this , look forward to any reply,s on this subject .
a frustrated novice player
regards - Tommy