PSR Keyboards (11 Boards) > PSR-S910/S710 (SFF2)

multi pad problem

(1/3) > >>

kellyboy1:
hello everybody i have a psrs910 and the first two multipad buttons dont work ihave cleaned them but just the same any insight into this problem would be much appreciated

Fred Smith:

--- Quote from: kellyboy1 on July 26, 2018, 08:05:48 PM ---hello everybody i have a psrs910 and the first two multipad buttons dont work ihave cleaned them but just the same any insight into this problem would be much appreciated

--- End quote ---

No problem, we'd love to help.

What does "don't work" mean? They don't light up? They don't load the pad? They're off tempo?

The more you can tell us about the problem, the easier it will be to solve.

Fred

kellyboy1:
they dont switch on the multipads

they dont light up or load the multi pad have had to press them really hard for a while now

Jean-Pierre 33:
Hello Kellyboy1,

You have to disassemble your PSR 910 to access the circuit "PNR" where are the contacts of the 4 Multipad keys then clean all the contacts on the surface (SW25 to SW 30) of this card with an anti-crash bomb with cotton buds for the electronic contacts and also the carbon contacts that are under the 6 keys used by this Multipads section.

See page 56 of the PSR S 910 Service Manual that you can download at: https://app.box.com/s/1xoyutkkqi8uoi65au5p9tipp1234s7e

Best Regards

Jean-Pierre 33

Dick Rector:
Whatever you do, NEVER use an oil-based cleaner like WD40 or similar. Great for rusty locks but it will ruin your keyboard.

Navigation

[0] Message Index

[#] Next page