Hi I've gone through the set up as per reference manual, it shows pedal 2 fill break but nothing happens. I've given up and removed the pedal and I'll use the button. Thanks for input.
If you would rather use a pedal, check to see if you have 'Registration Sequence' turned on.
If this is on, and a pedal is set for this function, then it will override the 'normal' pedal function.
I don't have a Genos, but on my Tyros4, Pedals 1 and 2 are set by default to 'Regist +' and 'Regist -', so if Registration Sequence is enabled, both pedals switch to this and stop carrying out their 'normal' functions. I suspect that Genos is the same!
If 'Registration Sequence' is On, turn it off to enable the 'normal' functions to all pedal inputs.
There is a 'Note' about this on both pages 125 and 101 of the Reference Manual.
Regards
Ian