Author Topic: PSR-2100. It this a problem and hang up !  (Read 32148 times)

0 Members and 1 Guest are viewing this topic.

danubeblue41

  • Guest
PSR-2100. It this a problem and hang up !
« on: March 02, 2006, 02:38:39 AM »
I own a PSR-2100. It this a problem: When I press Power button, display show

logo YAMAHA, and next a one texts screen following:
   Assertion Failed!
   Condition: 0
   File: ¥src¥hisysdwn.c
   Line: 133
   Address Error (read) !!
   Faram: H’8C1773F0

and it hang up !!? Maddening!  :? It this not handle and I can (only) just press Power

button.
Please hang together.
Thank!
danubeblue41

Offline MBedesem

Re: PSR-2100. It this a problem and hang up !
« Reply #1 on: March 02, 2006, 04:22:59 AM »
Try with no floppy in the floppy drive. If the same, then the PSR is sick.

It needs service.

sheena_lolo

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #2 on: March 02, 2006, 09:19:12 AM »

danubeblue41, try to boot 2100 in "self test" mode. To enter self test mode do the following things.

while pressing [C#2], [F2] and [G#2] keys turn the [STANDBY/ON] switch on. You will find many self check tests. Run each of them to see which hardware is failing.

Bill had posted one detailed explanation doc on self test mode, you can easily find it here.

Regards,
Sheena




danubeblue41

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #3 on: April 04, 2006, 12:23:39 AM »
Thank you very much guys ! the PSR is not sick  :lol:

michaeldevine

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #4 on: October 29, 2008, 12:53:06 AM »
Hi,
I have a similar problem........can you tell me how you solved it when you had this glitch ????

regards
Michael

Offline RONBO

Re: PSR-2100. It this a problem and hang up !
« Reply #5 on: October 08, 2009, 12:56:27 PM »
hello all out there

My 2100 is showing the ASSERTION FAILED mesage and shuts down altogether.

The yamaha tekkie in toronto says that's a new one on him, so can any one help with this.

Is it even something that can be fixed? How much? Can I do it at home?

regards

Ron

Offline Bill Grosse

Re: PSR-2100. It this a problem and hang up !
« Reply #6 on: October 08, 2009, 01:21:58 PM »
Ron,

Always the first thing is a factory reset.
While turning on the keyboard, hold down the right most white key on the
keyboard and continue holding it down until the keyboard has finished the start up.

Bill G
I wasn't going to do anything today - so far, I'm on schedule, :)

Offline RONBO

Re: PSR-2100. It this a problem and hang up !
« Reply #7 on: October 08, 2009, 01:48:41 PM »
Thanks for that, Bill .

I did that as well as follow your instructions on the self test. The self test revealed nothing unusual.
I called Yamaha in Toronto and talked to a nice fellow named Roger. As I mentioned before, he said he
never heard of ASSERTION FAILED. I can't believe that he would never have heard that before.

I'm baffled, maybe a new 910 would be the cure.

regards,

Ron

Offline Bill Grosse

Re: PSR-2100. It this a problem and hang up !
« Reply #8 on: October 08, 2009, 02:34:29 PM »
Ron,

What better reason can you have to get your hands on the S-910.  :D :D :D :D

The message indicates to me that the operating system has failed for some reason.
May even be a low voltage condition - have you checked the power supply for proper voltage and ability to carry a load?
Feel it to see if it is getting hot.

Bill G
I wasn't going to do anything today - so far, I'm on schedule, :)

Offline RONBO

Re: PSR-2100. It this a problem and hang up !
« Reply #9 on: October 08, 2009, 02:58:55 PM »
that seems to check out all right

thanks

Ron

Offline MBedesem

Re: PSR-2100. It this a problem and hang up !
« Reply #10 on: October 08, 2009, 05:18:21 PM »
I cannot remember where I got this idea, but I seem to recall this was part of an error message relating to a bad memory chip.

If so, the service center may tell you that their only alternative is to replace the main board at high cost.

Sorry.


Regards,

Michael

Offline Bill Grosse

Re: PSR-2100. It this a problem and hang up !
« Reply #11 on: October 08, 2009, 05:34:42 PM »
Yeah,

I can verify the high cost part - I had to replace the motherboard on my 2100 and it was listed by Yamaha at $700.00  :o :'(
My dealer ordered it and discounted it some, but the price was still high.
I would take the money and buy that S-910 your thinking about.  ;)

Bill G

I wasn't going to do anything today - so far, I'm on schedule, :)

Offline RONBO

Re: PSR-2100. It this a problem and hang up !
« Reply #12 on: October 09, 2009, 02:47:31 PM »
Thank you my friends for making a difficult decision easy to make.

I believe a new 910 is what will cure this sick 2100. However, it's been working well since yesterday, go figure!!!!

Regards,


Ron 
 

Offline MBedesem

Re: PSR-2100. It this a problem and hang up !
« Reply #13 on: October 09, 2009, 05:34:05 PM »
One can only hope...

Truthfully, the sound technology has improved greatly between the 2000/2100 and the 910.

I just gave up my 2000 ( I still have a 330, a T2 and a T3), but before I did, I checked it out. It sounded wonderful! I was starting to have second thoughts, so I fired up the T3 and used the same style and the same chords, etc.

The 2000 sound was great, but the T3's was too, albeit in a very different way.

The T3 (and 910, by assumption) uses different samples, different voices and different effects to make a sound that is more spacial, clearer, and, to my ear, more sophisticated and modern.

The only way to tell if the new sound is for you is to try it for yourself. If the 2100 dies again, this is a forced choice, but I recommend looking at the options regardless.

Regards,

Michael



Offline RONBO

Re: PSR-2100. It this a problem and hang up !
« Reply #14 on: October 31, 2009, 08:30:30 PM »
Hello everyone,

Well, it's hollowe'en evening and my 2100 is working great.
I took it apart, cleaned the dust and checked out all the plug-ins. truthfully I don't know what happened, but I put it back together and it's behaving.

I would like to say I solved this problem, but I can"t say for sure what I did. All I know is that it's playable, thus  there's going to be a delay in my pursuit of a new S910.

Thanks for your input, all of you

Regards,

Ron

Offline Bill Grosse

Re: PSR-2100. It this a problem and hang up !
« Reply #15 on: October 31, 2009, 08:54:24 PM »
Ron,

Good news about your 2100 working again.
When mine went South, it was due to cold solder joints in the motherboard.
Really no way to repair that.

Bill G
I wasn't going to do anything today - so far, I'm on schedule, :)

Jacson

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #16 on: August 19, 2012, 11:50:54 AM »
PLEASE HELP MEEE...... YAMAHA PSR 2100 ASSERTION FAILED!  CONDITION:0  FILE:. ¥src¥hisysdwn.c  LINE:133  TLB MISS (READ)!!  PARAM:H 80407704

Jacson

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #17 on: August 19, 2012, 11:56:42 AM »
Please help meee                                                                                                                                                                                                                                                           Assertion Failed!   
   Condition: 0
   File: ¥src¥hisysdwn.c
   Line: 133
   TLB Miss (read) !!
   Param: H’80407704     PLEASE HELP MEEEEE                     
« Last Edit: August 19, 2012, 12:07:01 PM by Jacson »

Offline MBedesem

Re: PSR-2100. It this a problem and hang up !
« Reply #18 on: August 19, 2012, 01:57:11 PM »


Jacson:

I do not know what the problem is, but you can try doing a System Reset ( Hold down the right most white key while turning on the power. Hold until the message appears).

Also, make sure that the power supply is connected properly and that the PSR is not running hot by being placed on a bed or pad that blocks the ventillation holes.

Otherwise, you need to contact your local Customer Service office, your dealer, or http://www.global.yamaha.com/support/contact.php 

Regards,

Michael

 

Jacson

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #19 on: August 19, 2012, 03:03:53 PM »
Assertion failed what???

Offline MinhTuan89

Re: PSR-2100. It this a problem and hang up !
« Reply #20 on: March 11, 2014, 05:47:12 PM »
We can fix this Error. In my country, this is popular error of YAMAHA PSR-1000-----2100
https://www.facebook.com/YamahaRepairServicesCenter.MinhTuan?ref=br_rs

zombi

  • Guest
Re: PSR-2100. It this a problem and hang up !
« Reply #21 on: June 12, 2016, 04:53:04 PM »
Hello , i have are yamaha psr 2100, it stoped working,
it now almost are week, on screen it shows words
saying .
Assertion failed !
condition : o
file : src
hisydwn. c line : 133
TLB miss  read
param: 8C1DBCE8
please can any one tell me what to do.
« Last Edit: June 12, 2016, 04:55:10 PM by zombi »

Offline Fred Smith

Re: PSR-2100. It this a problem and hang up !
« Reply #22 on: June 12, 2016, 06:56:05 PM »
You just need to follow the directions already provided in this thread. Try a system reset. If that doesn't work, you'll have to take it in for repair.

Fred
Fred Smith,
Saskatoon, SK
Sun Lakes, AZ
Tyros 4, Bose L1, Finale 2011
Check out my Registration Lessons