Author Topic: Unmount PSR9000 speakers, weight save = x  (Read 11124 times)

0 Members and 1 Guest are viewing this topic.

Offline ElectroVoice

Unmount PSR9000 speakers, weight save = x
« on: December 07, 2014, 01:33:53 PM »
If i unmount the speakers from the psr9000, how mutch weight will i save? Anyone knows?
 

Offline ElectroVoice

Re: Unmount PSR9000 speakers, weight save = x
« Reply #1 on: December 08, 2014, 11:22:48 AM »
no one knows the weight of the speakers?
 

Offline DonM

Re: Unmount PSR9000 speakers, weight save = x
« Reply #2 on: December 08, 2014, 03:30:02 PM »
PSR9000 is quite a few years old.  I doubt if many of us still have one.  I remember it was very heavy!
DonM
 

Offline MarkF_48

Re: Unmount PSR9000 speakers, weight save = x
« Reply #3 on: December 08, 2014, 04:50:46 PM »
I looked up the weight of the  keyboard .... 22.5Kg (49 lbs. 10 oz)

I have a pair of speakers that are intended for use in a vehicle, have a woofer and tweeter similar to what looks like the PSR9000 has and are housed in molded plastic case. The combined weight for the two with the case is approximately 2.7Kg (6lbs). I'm guessing the two plastic cases may be about 0.68Kg (1.5lbs) total together, so the set of speakers minus the case might be about 2.0Kg (4.5lbs) and that estimate may be on the high side. Is it worth tearing down the keyboard to remove the speakers and possibly only save 4 lbs?
 

Offline yamahajohn

Re: Unmount PSR9000 speakers, weight save = x
« Reply #4 on: December 09, 2014, 03:13:13 AM »
Electrovoice, its not just the speakers that make the 9000 heavy but boxes they are in you could take the actual speakers out but not the boxes as these have parts of the 9000 attatched to them including some screw holes for the bottom cover the actual speakers are not that heavy dont know the exact weight but removing them would not make much difference .
 

Offline ElectroVoice

Re: Unmount PSR9000 speakers, weight save = x
« Reply #5 on: December 14, 2014, 11:25:25 AM »
oh well, let it be then. Thanks for the information.
 

Offline Robert13

Re: Unmount PSR9000 speakers, weight save = x
« Reply #6 on: May 08, 2017, 12:49:15 AM »
I have tried to remove the speakers, but those are part of the main construction. The power unit and main ampifier are resting on the speakers. So, I have placed them back on the system. I think a speaker weights about 4 KG.